HRP-600 series

June 26, 2023

HRPG-1000 series

June 26, 2023

HRPG-600 Series

MW Mean Well Meanwell 600W Single Output with PFC Fucntion Switching Power Supply HRPG-600 series

Features

Universal AC input / Full range
Built-in active PFC function, PF>0.93
High efficiency up to 89%
Withstand 300VAC surge input for 5 seconds
Protections: Short circuit / Overload / Over voltage / Over temperature
Built-in cooling fan ON-OFF control
Built-in DC OK signal
Built-in remote ON-OFF control
Standby [email protected]
Built-in remote sense function
No load power consumption<0.75W
Current sharing up to 2400W (3+1) (24V,36V,48V)
5 years warranty

Mean Well Enclosed Switching Power Supply HRPG-600 Series Data Sheet Download

600W Single Output with PFC Function Enclosed Switching Power Supply HRPG-600 Series

Description

The Mean Well enclosed switching power supply HRPG-600 series is a family of high-reliability, high-performance AC/DC power supplies. These power supplies are designed to meet the rigorous demands of industrial and medical applications, and are built to provide reliable and stable power in even the most challenging environments.

The MEAN WELL single output power supply with PFC function HRPG-600 series features a universal AC input range of 85-264VAC, and is available in a range of output voltages, 3.3VDC (Model N0.: HRPG-600-3.3), 5VDC (Model N0.: HRPG-600-5), 7.5VDC (Model N0.: HRPG-600-7.5), 12VDC (Model N0.: HRPG-600-12), 15VDC (Model N0.: HRPG-600-15), 24VDC (Model N0.: HRPG-600-24), 36VDC (Model N0.: HRPG-600-36), and 48VDC (Model N0.: HRPG-600-48). The power supplies are highly efficient, with a typical efficiency of up to 89%, and are fully protected against overvoltage, overcurrent, and short-circuit conditions.

The MW SMPS HRPG-600 series is also designed for high reliability, with a mean time between failures (MTBF) of up to 500,000 hours. The power supplies are built with high-quality components and are designed to operate over a wide temperature range, from -40°C to +85°C.

Overall, the Mean Well power supply HRPG-600 series is a high-performance, reliable, and versatile power supply solution for a wide range of industrial and medical applications.

Specification

MODEL		HRPG-600-3.3	HRPG-600-5	HRPG-600-7.5	HRPG-600-12	HRPG-600-15	HRPG-600-24	HRPG-600-36	HRPG-600-48
OUTPUT	DC VOLTAGE	3.3V	5V	7.5V	12V	15V	24V	36V	48V
	RATED CURRENT	120A	120A	80A	53A	43A	27A	17.5A	13A
	CURRENT RANGE	0 ~ 120A	0 ~ 120A	0 ~ 80A	0 ~ 53A	0 ~ 43A	0 ~ 27A	0 ~ 17.5A	0 ~ 13A
	RATED POWER	396W	600W	600W	636W	645W	648W	630W	624W
	RIPPLE & NOISE (max.) Note.2	120mVp-p	150mVp-p	150mVp-p	150mVp-p	150mVp-p	150mVp-p	200mVp-p	240mVp-p
	VOLTAGE ADJ. RANGE	2.8 ~ 3.8V	4.3 ~ 5.8V	6.8 ~ 9V	10.2 ~ 13.8V	13.5 ~ 18V	21.6 ~ 28.8V	28.8 ~ 39.6V	40.8 ~ 55.2V
	VOLTAGE TOLERANCE Note.3	±2.0%	±2.0%	±2.0%	±1.0%	±1.0%	±1.0%	±1.0%	±1.0%
	LINE REGULATION	±0.5%	±0.5%	±0.5%	±0.3%	±0.3%	±0.2%	±0.2%	±0.2%
	LOAD REGULATION	±1.0%	±1.0%	±1.0%	±0.5%	±0.5%	±0.5%	±0.5%	±0.5%
	SETUP, RISE TIME	1000ms, 50ms/230VAC 2500ms, 50ms/115VAC at full load
	HOLD UP TIME (Typ.)	16ms/230VAC 16ms/115VAC at full load
INPUT	VOLTAGE RANGE Note.4	85 ~ 264VAC 120 ~ 370VDC
	FREQUENCY RANGE	47 ~ 63Hz
	POWER FACTOR (Typ.)	PF>0.93/230VAC PF>0.99/115VAC at full load
	EFFICIENCY (Typ.)	78.5%	82%	86%	88%	88%	88%	89%	89%
	AC CURRENT (Typ.)	7.6A/115VAC 3.6A/230VAC
	INRUSH CURRENT (Typ.)	35A/115VAC 70A/230VAC
	LEAKAGE CURRENT	<1.2mA / 240VAC
PROTECTION	OVERLOAD	105 ~ 135% rated output power
	OVERLOAD	Protection type: Constant current limiting, recovers automatically after fault condition is removed
	OVER VOLTAGE	3.96 ~ 4.62V	6 ~ 7V	9.4 ~ 10.9V	14.4 ~ 16.8V	18.8 ~ 21.8V	30 ~ 34.8V	41.4 ~ 48.6V	57.6 ~ 67.2V
	OVER VOLTAGE	Protection type: Shut down o/p voltage, re-power on to recover
	OVER TEMPERATURE	Shut down o/p voltage, recovers automatically after temperature goes down
FUNCTION	5V STANDBY	5VSB: [email protected] ; tolerance±5%, ripple: 50mVp-p(max.)
	DC OK SIGNAL	PSU turn on: 3.3 ~ 5.6V; PSU turn off: 0 ~ 1V
	REMOTE CONTROL	RC+ / RC-: 4 ~ 10V or open = power on; 0 ~ 0.8V or short = power off
	FAN CONTROL (Typ.)	Load 35±15% or RTH2≧50℃ Fan on
ENVIRONMENT	WORKING TEMP.	-40 ~ +70℃ (Refer to “Derating Curve”)
	WORKING HUMIDITY	20 ~ 90% RH non-condensing
	STORAGE TEMP., HUMIDITY	-40 ~ +85℃, 10 ~ 95% RH non-condensing
	TEMP. COEFFICIENT	±0.03%/℃ (0 ~ 50℃)
	VIBRATION	10 ~ 500Hz, 5G 10min./1cycle, 60min. each along X, Y, Z axes
SAFETY & EMC (Note 7)	SAFETY STANDARDS	UL62368-1, TUV BS EN/EN62368-1, EAC TP TC 004 approved
	WITHSTAND VOLTAGE	I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC
	ISOLATION RESISTANCE	I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH
	EMC EMISSION	Compliance to BS EN/EN55032 (CISPR32) Class B, BS EN/EN61000-3-2, -3, EAC TP TC 020
	EMC IMMUNITY	Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11, BS EN/EN55035, BS EN/EN61000-6-2, heavy industry level, EAC TP TC 020
OTHERS	MTBF	1142.5K hrs min. Telcordia SR-332 (Bellcore); 138.5K hrs min. MIL-HDBK-217F (25℃)
	DIMENSION	21810563.5mm (LWH)
	PACKING	1.58Kg; 8pcs/13.6Kg/1.34CUFT

HRPG-600 series

HRP-600 series

HRPG-1000 series

MW Mean Well Meanwell 600W Single Output with PFC Fucntion Switching Power Supply HRPG-600 series

Features

Mean Well Enclosed Switching Power Supply HRPG-600 Series Data Sheet Download

Description

Specification

Application

Mean Well Enclosed Switching Power Supply HRPG-600 Series Video Show

Find us on SNS

HRPG-600 series

HRP-600 series

HRPG-1000 series

HRP-600 series

HRPG-1000 series

MW Mean Well Meanwell 600W Single Output with PFC Fucntion Switching Power Supply HRPG-600 series

Features

Mean Well Enclosed Switching Power Supply HRPG-600 Series Data Sheet Download

Description

Specification

Application

Mean Well Enclosed Switching Power Supply HRPG-600 Series Video Show

Find us on SNS

You may also like

RSP-3000 series

RSP-2400 series

RSP-2000 series