MW Mean Well Meanwell 60W Ultra Wide Input DIN Rail Type DC-DC Converter DDRH-60 Series

Features

150~ 1500Vdc 10:1 ultra – wide input range
57mm slim width
4KVac I/O high isolation(Reinforced isolation)
Protections: Short circuit / Overload / Over voltage / Over temperature / DC input under voltage / DC input reverse polarity
Cooling by free air convection
Can be installed on DIN rail TS-35/7.5 or 15
-30~+80°C ultra-wide operating temperature (＞+55°C derating)
Over voltage categoryⅡ
Operating altitude up to 5000 meters
DC OK relay contact
DC output voltage adjustable(+20%)
3 years warranty

Mean Well DC-DC Converter DDRH-60 Series Data Sheet Download

Mean Well 60W Ultra Wide Input DIN Rail Type DC-DC Converter DDRH-60 Series

Description

DDRH-60 series is a 150 ~ 1500Vdc ultra-high input DIN rail type DC-DC converter which can supply stable working voltage for the load. It is suitable to be mounted on TS-35/7.5 or TS-35/15 rails. Main features are as following: easy to install DIN rail type, narrow width(57mm) in slim design, -30~+80°C wide range operating temperature, 4KVAC high isolation voltage, operation at 5000m altitude, high efficiency, low ripple & noise, complete protections and so on. DDRH-60 is compliant with BS EN/EN61000-6-2 standard regarding immunity for industrial environments. It is suitable for industrial automation, surveillance, telecommunication and can be widely deployed in the applications of new energy generation such as solar power, and windmill power generation, for instances, photovoltaic power systems, high voltage inverting , DC bus centralized application and so forth.

Mean Well DC-DC Converter DDRH-60 Series Model Encoding

Specification

MODEL				DDRH-60-5	DDRH-60-12		DDRH-60-24		DDRH-60-48
OUTPUT	DC VOLTAGE			5V	12V		24V		48V
	RATED CURRENT			10A	5A		2.5A		1.25A
	CURRENT RANGE			0 ~ 10A	0 ~ 5A		0 ~ 2.5A		0 ~ 1.25A
	RATED POWER			50W	60W		60W		60W
	RIPPLE & NOISE (max.) Note.2			100mVp-p	120mVp-p		150mVp-p		200mVp-p
	VOLTAGE ADJ. RANGE			5 ~ 6V	12 ~ 15V		24 ~ 29V		48 ~ 54V
	VOLTAGE TOLERANCE Note.3			±1.5%	±1.5%		±1.0%		±1.0%
	LINE REGULATION			±0.5%	±0.5%		±0.5%		±0.5%
	LOAD REGULATION			±1.5%	±0.5%		±0.5%		±0.5%
	EXTERNAL CAPACITANCE LOAD (Max.)			6000μF	4000μF		2500μF		1000μF
INPUT	VOLTAGE RANGE Note.4			150 ~ 1500Vdc
	EFFICIENCY (Typ.)		200Vdc	80%	83%		86%		87%
			800Vdc	81%	85%		87%		88%
			1500Vdc	76%	81%		84%		83%
	INRUSH CURRENT (max.)			COLD START 120A /1500Vdc 80A/800Vdc 30A/150Vdc
PROTECTION	OVERLOAD			105 ~ 135% rated output power
				Protection type: Hiccup up mode when output voltage<55%, recovers automatically after condition is removed; Constant current limiting, recovers automatically after fault condition is removed within 55% ~ 100% rated output voltage
	OVER VOLTAGE			6.6 ~ 8.4V	16.5 ~ 21V		30 ~ 38V		55 ~ 60V
				Protection type: Hiccup up mode, recovers automatically after fault condition is removed
	OVER TEMPERATURE			Protection type: Hiccup up mode, recovers automatically after fault condition is removed
	DC INPUT	REVERSE POLARITY		By internal Bridge Diode, no damage, recovers automatically after fault condition removed
		UNDER VOLTAGE LOCKOUT		Under voltage protection range:120 ~ 130Vdc, Under voltage release range:130 ~ 146.5Vdc
FUNCTION	DC OK SIGNAL			Relay contact rating(max.): 30V / 1A resistive
ENVIRONMENT	WORKING TEMP.			-30 ~ +80℃ (Refer to “Derating Curve”)
	WORKING HUMIDITY			20 ~ 90% RH non-condensing
	STORAGE TEMP., HUMIDITY			-40 ~ +80℃, 10 ~ 95% RH non-condensing
	TEMP. COEFFICIENT			±0.03%/℃ (0 ~ 55℃)
	VIBRATION			Component: 10 ~ 500Hz, 3G 10min./1cycle, 60min. each along X, Y, Z axes; Mounting clip: Compliance to IEC60068-2-6
	OPERATING ALTITUDE Note.5			5000 meters /OVCⅡ
	OVER VOLTAGE CATEGORY			Ⅱ; According to EN62109-1; altitude up to 5000 meters
SAFETY & EMC (Note.7)	SAFETY STANDARDS			IEC62109-1(LVD), EAC TP TC 004 approved; Design refers to UL1741(By request)
	WITHSTAND VOLTAGE			I/P-O/P:4KVAC O/P-DC OK:0.5KVAC
	ISOLATION RESISTANCE			I/P-O/P, 100M Ohms / 500VDC / 25℃/ 70% RH
	EMC EMISSION			Parameter		Standard		Test Level / Note
				Conducted		BS EN/EN55032(CISPR32)		Class A
				Radiated		BS EN/EN55032(CISPR32)		Class A
				Voltage Flicker		BS EN/EN61000-3-3		——-
	EMC IMMUNITY			BS EN/EN55035, BS EN/EN61000-6-2
				Parameter		Standard		Test Level /Note
				ESD		BS EN/EN61000-4-2		Level 3, 8KV air; Level 2, 4KV contact, criteria A
				Radiated Susceptibility		BS EN/EN61000-4-3		Level 3, 10V, criteria A
				EFT/Burest		BS EN/EN61000-4-4		Level 3, 2KV, criteria A
				Surge		BS EN/EN61000-4-5		Level 4, 2KV/Vin+ ~ Vin-, criteria A
				Conducted		BS EN/EN61000-4-6		Level 3, 10V, criteria A
				Magnetic Field		BS EN/EN61000-4-8		Level 4, 30A, criteria A
				Voltage Dips and interruptions		BS EN/EN61000-4-11		＞95% dip 0.5 periods, 30% dip 25 periods, ＞95% interruptions 250 periods
OTHERS	MTBF			454.5K hrs min. MIL-HDBK-217F (25℃); 1439.7K hrs min. Telcordia TR/SR-332 (Bellcore) (25℃)
	DIMENSION			5793.5105mm (WHD)
	PACKING			0.8Kg; 16pcs/12.8Kg/0.84CUFT

Applications

Photovoltaic power generation
High voltage freqency conversion
Industrial control system
Semiconductor fabrication equipment
Electro-mechanical apparatus
DC bus centralized application

Mean Well DC-DC Converter DDRH-60 Series Video Show

Find us on SNS

You can find us and know more about us on SNS: