MW Mean Well Meanwell 240W Single Output Industrial Switching Power Supply DIN Rail SDR-240 Series

Features

High efficiency 94% and low power dissipation
150% peak load capability
Built-in active PFC function, PF>0.93
Protections: Short circuit / Overload / Over voltage / Over temperature
Cooling by free air convection
Can be installed on DIN rail TS-35/7.5 or 15
UL 508 (industrial control equipment) approved
BS EN/EN61000-6-2(BS EN/EN50082-2) industrial immunity level
Built-in DC OK relay contact
100% full load burn-in test
3 years warranty

Description

The Mean Well DIN Rail Single Output Power Supply SDR-240 series is a reliable and high-quality power supply designed for industrial applications. It is specifically designed to be mounted on DIN rails, making it easy to install and integrate into various systems.

The SDR-240 series offers a single output with a power rating of 240 watts. It operates on a wide input voltage range of 88-264VAC, making it suitable for use in different regions around the world. The power supply also features a built-in active PFC function to ensure high power factor correction and efficiency.

With its compact and slim design, the SDR-240 series is ideal for space-limited installations. It is protected against overvoltage, overcurrent, and short-circuit conditions, providing reliable and stable power to connected devices. The power supply also has a wide operating temperature range of -25 to +70 degrees Celsius, allowing it to withstand harsh environmental conditions.

The SDR-240 series is equipped with various safety approvals, including UL, CUL, TUV, CB, CE, and FCC certifications, ensuring compliance with international standards. It also features a built-in DC OK relay contact for remote monitoring of the power supply status.

Overall, the Mean Well DIN Rail Single Output Power Supply SDR-240 series is a versatile and efficient power supply solution, suitable for a wide range of industrial applications that require reliable and stable power delivery.

Mean Well Power Supply SDR-240 Series Data Sheet Download

240W Single Output Switching Power Supply SDR-240 Series

Specification

MODEL		SDR-240-24	SDR-240-48
OUTPUT	DC VOLTAGE	24V	48V
	RATED CURRENT	10A	5A
	CURRENT RANGE	0 ~ 10A	0 ~ 5A
	RATED POWER	240W	240W
	PEAK CURRENT	15A	7.5A
	PEAK POWER Note.6	360W (3sec.)
	RIPPLE & NOISE (max.) Note.2	50mVp-p	50mVp-p
	VOLTAGE ADJ. RANGE	24 ~ 28V	48 ~ 55V
	VOLTAGE TOLERANCE Note.3	±1.0%	±1.0%
	LINE REGULATION	±0.5%	±0.5%
	LOAD REGULATION	±1.0%	±1.0%
	SETUP, RISE TIME	650ms, 60ms/230VAC 1300ms, 60ms/115VAC at full load
	HOLD UP TIME (Typ.)	20ms/230VAC 20ms/115VAC at full load
INPUT	VOLTAGE RANGE	88 ~ 264VAC 124 ~ 370VDC
	FREQUENCY RANGE	47 ~ 63Hz
	POWER FACTOR (Typ.)	0.94/230VAC 0.99/115VAC at full load
	EFFICIENCY (Typ.) Note.8	94%
	AC CURRENT (Typ.)	2.6A/115VAC 1.3A/230VAC
	INRUSH CURRENT (Typ.)	33A/115VAC 55A/230VAC
	LEAKAGE CURRENT	<1mA / 240VAC
PROTECTION	OVERLOAD	Normally works within 110 ~ 150% rated output power for more than 3 seconds and then shut down o/p voltage with auto-recovery
		>150% rated power, constant current limiting with auto-recovery within 2 seconds and may cause to shut down if over 2 seconds
	OVER VOLTAGE	29 ~ 33V	56 ~ 65V
		Protection type: Shut down o/p voltage with auto-recovery
	OVER TEMPERATURE	95℃±5℃ (TSW: detect on heatsink of power switch)
		Protection type: Shut down o/p voltage, recovers automatically after temperature goes down
FUNCTION	DC OK REALY CONTACT RATINGS (max.)	60Vdc/0.3A, 30Vdc/1A, 30Vac/0.5A resistive load
ENVIRONMENT	WORKING TEMP. Note.5	-25 ~ +70℃ (Refer to “Derating Curve”)
	WORKING HUMIDITY	20 ~ 95% RH non-condensing
	STORAGE TEMP., HUMIDITY	-40 ~ +85℃, 10 ~ 95% RH
	TEMP. COEFFICIENT	±0.03%/℃ (0 ~ 50℃)
	VIBRATION	Component:10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes; Mounting: Compliance to IEC60068-2-6
SAFETY & EMC (Note 4)	SAFETY STANDARDS	UL508, TUV BS EN/EN62368-1, AS/NZS 62368.1, EAC TP TC 004 approved;(meet BS EN/EN60204-1)
	WITHSTAND VOLTAGE	I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC O/P-DC OK:0.5KVAC
	ISOLATION RESISTANCE	I/P-O/P, I/P-FG, O/P-FG:>100M Ohms / 500VDC / 25℃/ 70% RH
	EMC EMISSION	Compliance to BS EN/EN55032 (CISPR32), BS EN/EN61204-3 Class B, BS EN/EN61000-3-2, -3, EAC TP TC 020
	EMC IMMUNITY	Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11, BS EN/EN55035, BS EN/EN61000-6-2 (BS EN/EN50082-2), BS EN/EN61204-3, heavy industry level, EAC TP TC 020, SEMI F47 approved
OTHERS	MTBF	1160.3K hrs min. Telcordia SR-332 (Bellcore); 169.3K hrs min. MIL-HDBK-217F (25℃)
	DIMENSION	63125.2113.5mm (WHD)
	PACKING	1.03Kg; 12pcs/13.4Kg/1.22CUFT

Mean Well Power Supply SDR-240 Series Video Show

Find us on SNS

You can find us and know more about us on SNS: