MW Mean Well Meanwell 480W Slim Three Phase Industrial DIN Rail with PFC Function TDR-480 Series

Features

Three-Phase 340 ~ 550VAC wide range input (Dual phase operation possible)
Width only 85.5mm
Built-in active PFC function compliance to BS EN/EN61000-3-2
High efficiency 93% and low power dissipation
Protections: Short circuit / Overload / Over voltage / Over temperature
Cooling by free air convection
Built-in constant current limiting circuit
Can be installed on DIN rail TS-35/7.5 or 15
UL508(industrial control equipment)approved
BS EN/EN61000-6-2(BS EN/EN50082-2) industrial immunity level
Optional DC OK relay contact
3 years warranty

Description

TDR-480 is one economical slim 480W DIN rail power supply series, adapt to be installed on TS-35/7.5 or TS-35/15 mounting rails. The body is designed 85.5mm in width, which allows space saving inside the cabinets. The entire series adopts the full range AC input from 3 0 340VAC to 550VAC (Dual Phase operation possible) and conforms to BS EN/EN61000-3-2, the norm the European Union regulates for harmonic current. TDR-480 is designed with metal housing that enhances the unit’s power dissipation. With working efficiency up to 93 %, the entire series can operate at the ambient temperature between -20℃ and 70℃ under air convection. It is equipped with constant current mode for overload protection, fitting various inductive or capacitive applications. The complete protection functions and relevant certificates for industrial control apparatus (UL508, IEC 62368-1 CB approved by UL.) make TDR-480 a very competitive power supply solution for industrial applications.

Mean Well Power Supply TDR-480 Series Model Encoding

Mean Well Power Supply TDR-480 Series Data Sheet Download

480W Slim Three Phase Industrial DIN Rail with PFC Function TDR-480 Series

Specification

MODEL		TDR-480-24		TDR-480-48
OUTPUT	DC VOLTAGE	24V		48V
	RATED CURRENT	20A		10A
	CURRENT RANGE	0 ~ 20A		0 ~ 10A
	RATED POWER	480W		480W
	RIPPLE & NOISE (max.) Note.2	150mVp-p		150mVp-p
	VOLTAGE ADJ. RANGE	24 ~ 28V		48 ~ 55V
	VOLTAGE TOLERANCE Note.3	±1.0%		±1.0%
	LINE REGULATION	±0.5%		±0.5%
	LOAD REGULATION	±1.0%		±1.0%
	SETUP, RISE TIME	1200ms, 60ms/400VAC 800ms, 60ms/500VAC at full load
	HOLD UP TIME (Typ.)	20ms / 400VAC 20ms / 500VAC at full load
INPUT	VOLTAGE RANGE Note.4	Three-Phase 340 ~ 550VAC (Dual phase operation possible) 480 ~ 780VDC
	FREQUENCY RANGE	47 ~ 63Hz
	POWER FACTOR (Typ.)	PF≧0.9/400VAC PF≧0.88/500VAC at full load
	EFFICIENCY (Typ.)	92.5%		93%
	AC CURRENT (Typ.)	0.85A/400VAC 0.7A/500VAC
	INRUSH CURRENT (Typ.)	COLD START 50A
	LEAKAGE CURRENT	<3.5mA / 530VAC
PROTECTION	OVERLOAD	105 ~ 130% rated output power
		Protection type: Constant current limiting, unit will shut down after 3 sec., re-power on to recover
	OVER VOLTAGE	29 ~ 33V		56 ~ 65V
		Protection type: Shut down o/p voltage, re-power on to recover
	OVER TEMPERATURE	Shut down o/p voltage, recovers automatically after temperature goes down
ENVIRONMENT	WORKING TEMP. Note.5	-30 ~ +70℃ (Refer to “Derating Curve”)
	WORKING HUMIDITY	20 ~ 95% RH non-condensing
	STORAGE TEMP., HUMIDITY	-40 ~ +85℃, 10 ~ 95% RH
	TEMP. COEFFICIENT	±0.03%/℃ (0 ~ 50℃)
	VIBRATION	Component:10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes; Mounting: Compliance to IEC60068-2-6
SAFETY & EMC (Note 4)	SAFETY STANDARDS	UL508, IEC62368-1, UL 62368-1, AS/NZS 62368.1, BIS IS13252(Part1) (only for 24V), EAC TP TC 004 approved, Design refers to BS EN/EN62368-1
	WITHSTAND VOLTAGE	I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC O/P-DC OK(optional):0.5KVAC
	ISOLATION RESISTANCE	I/P-O/P, I/P-FG, O/P-FG:>100M Ohms / 500VDC / 25℃/ 70% RH
	EMC EMISSION	Parameter	Standard			Test Level / Note
		Conducted	BS EN/EN55032(CISPR32) / BS EN/EN61204-3			Class B
		Radiated	BS EN/EN55032(CISPR32) / BS EN/EN61204-3			Class B
		Harmonic Current	BS EN/EN61000-3-2			Class A
		Voltage Flicker	BS EN/EN61000-3-3			—–
	EMC IMMUNITY	BS EN/EN55035 , BS EN/EN61204-3
		Parameter	Standard		Test Level / Note
		ESD	BS EN/EN61000-4-2		Level 4, 15KV air ; Level 4, 8KV contact
		Radiated Field	BS EN/EN61000-4-3		Level 3
		EFT / Burst	BS EN/EN61000-4-4		Level 3
		Surge	BS EN/EN61000-4-5		Level 4, 2KV / Line-Line, Level 4, 4KV/ Line-Earth
		Conducted	BS EN/EN61000-4-6		Level 3
		Magnetic Field	BS EN/EN61000-4-8		Level 4
		Voltage Dips and Interruptions	BS EN/EN61000-4-11		＞95% dip 0.5 periods, 30% dip 25 periods＞ 95% interruptions 250 periods
OTHERS	MTBF	1174.0K hrs min. Telcordia SR-332(Bellcore); 108.3K hrs min. MIL-HDBK-217F (25℃)
	DIMENSION	85.5125.2128.5mm (WHD)
	PACKING	1.51Kg; 8pcs/13Kg/1.16CUFT

Mean Well Power Supply TDR-480 Series Video Show

Find us on SNS

You can find us and know more about us on SNS: