MDR-60 series
September 16, 2023
SDR-75 series
September 22, 2023MW Mean Well Meanwell 100W Single Output Switching Power Supply DIN Rail MDR-100 Series
Features
- Universal AC input/Full range
- Protections: Short circuit / Overload / Over voltage
- Cooling by free air convection
- Can be installed on DIN rail TS-35/7.5 or 15
- Class I, Div 2 Hazardous Locations T4
- LED indicator for power on
- DC OK relay contact
- No load power consumption<0.75W
- 100% full load burn-in test
- 3 years warranty
Description
The MDR-100 series is a reliable and efficient single output din rail power supply designed by Mean Well. With a power rating of 100W, this series offers a stable and regulated DC output voltage, making it suitable for various industrial applications.
The MDR-100 series features a compact and space-saving design, allowing for easy installation on standard DIN rail mounting. It has a wide input voltage range, ensuring compatibility with different power sources. The power supply also incorporates built-in protections, such as overvoltage, overcurrent, and short circuit protection, to safeguard connected devices from potential electrical faults.
With high efficiency and low energy consumption, the MDR-100 series helps to reduce power wastage and minimize operating costs. It operates within a wide temperature range and has a long lifespan, ensuring reliable performance even in challenging environments.
The MDR-100 series is designed to meet international safety standards and regulations, ensuring a high level of quality and reliability. It is widely used in automation, control systems, industrial equipment, and other applications where a stable and efficient power supply is required.
Mean Well Power Supply MDR-100 Series Data Sheet Download
Specification
| MODEL | MDR-60-5 | MDR-60-12 | MDR-60-24 | MDR-60-48 | |
|
OUTPUT |
DC VOLTAGE | 5V | 12V | 24V | 48V |
| RATED CURRENT | 10A | 5A | 2.5A | 1.25A | |
| CURRENT RANGE | 0 ~ 10A | 0 ~ 5A | 0 ~ 2.5A | 0 ~ 1.25A | |
| RATED POWER | 50W | 60W | 60W | 60W | |
| RIPPLE & NOISE (max.) Note.2 | 80mVp-p | 120mVp-p | 150mVp-p | 200mVp-p | |
| VOLTAGE ADJ. RANGE | 5 ~ 6V | 12 ~ 15V | 24 ~ 30V | 48 ~ 56V | |
| VOLTAGE TOLERANCE Note.3 | ±2.0% | ±1.0% | ±1.0% | ±1.0% | |
| LINE REGULATION | ±1.0% | ±1.0% | ±1.0% | ±1.0% | |
| LOAD REGULATION | ±1.5% | ±1.0% | ±1.0% | ±1.0% | |
| SETUP, RISE TIME Note.5 | 500ms, 30ms/230VAC 500ms, 30ms/115VAC at full load | ||||
| HOLD UP TIME (Typ.) | 50ms/230VAC 20ms/115VAC at full load | ||||
|
INPUT |
VOLTAGE RANGE | 85 ~ 264VAC 120 ~ 370VDC | |||
| FREQUENCY RANGE | 47 ~ 63Hz | ||||
| EFFICIENCY (Typ.) | 78% | 86% | 88% | 87% | |
| AC CURRENT (Typ.) | 1.8A/115VAC 1A/230VAC | ||||
| INRUSH CURRENT (Typ.) | COLD START 30A/115VAC 60A/230VAC | ||||
| LEAKAGE CURRENT | <1mA / 240VAC | ||||
|
PROTECTION |
OVERLOAD |
105 ~ 150% rated output power | |||
| Protection type: Constant current limiting, recovers automatically after fault condition is removed | |||||
|
OVER VOLTAGE |
6.25 ~ 7.25V | 15.6 ~ 18V | 31.2 ~ 36V | 57.6 ~ 64.8V | |
| Protection type: Shut down o/p voltage, re-power on to recover | |||||
| FUNCTION | DC OK SIGNAL | Relay contact rating(max.): 30V/1A resistive | |||
|
ENVIRONMENT |
WORKING TEMP. | -20 ~ +70℃ (Refer to “Derating Curve”) | |||
| WORKING HUMIDITY | 20 ~ 90% RH non-condensing | ||||
| STORAGE TEMP., HUMIDITY | -40 ~ +85℃, 10 ~ 95% RH | ||||
| TEMP. COEFFICIENT | ±0.03%/℃ (0 ~ 50℃) | ||||
| VIBRATION | Component: 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes; Mounting: Compliance to IEC60068-2-6 | ||||
|
SAFETY & EMC (Note 4) |
SAFETY STANDARDS | Ul508, UL62368-1, TUV BS EN/EN62368-1, Class I, Div. 2 Group A, B, C, D Hazardous Locations T4, EAC TP TC 004, BSMI CNS14336-1, AS/NZS 60950.1, IS13252(Part1)/IEC60950-1(except 48V) approved | |||
| WITHSTAND VOLTAGE | I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC | ||||
| ISOLATION RESISTANCE | I/P-O/P, I/P-FG, O/P-FG:>100M Ohms / 500VDC / 25℃/ 70% RH | ||||
| EMC EMISSION | Compliance to BS EN/EN55032 (CISPR32), BS EN/EN61204-3 Class B, BS EN/EN61000-3-2, -3, EAC TP TC 020, CNS13438 Class B | ||||
|
EMC IMMUNITY |
Compliance to BS EN/EN61000-4-2, 3, 4, 5, 6, 8, 11, BS EN/EN55035, BS EN/EN61000-6-2, BS EN/EN61204-3, heavy industry level, EAC TP TC 020 | ||||
|
OTHERS |
MTBF | 2355.2K hrs min. Telcordia SR-332 (Bellcore); 489.9K hrs min. MIL-HDBK-217F (25℃) | |||
| DIMENSION | 40*90*100mm (W*H*D) | ||||
| PACKING | 0.33Kg; 42pcs/14.8Kg/0.82CUFT | ||||
