SDR-480P series
September 22, 2023
SDR-960 series
September 22, 2023MW Mean Well Meanwell 480W Single Output Industrial Switching Power Supply DIN Rail with PFC Function SDR-480 Series
Features
- High efficiency 94% and low power dissipation
- 150% peak load capability
- Built-in active PFC function, PF>0.94
- Protections: Short circuit / Overload / Over voltage / Over temperature
- Cooling by free air convection
- Built-in constant current limiting circuit
- Can be installed on DIN rail TS-35/7.5 or 15
- UL 508(industrial control equipment)approved
- BS EN/EN61000-6-2(BS EN/EN50082-2) industrial immunity level
- Built-in DC OK relay contact
- 100% full load burn-in test
- 3 years warranty
Description
The SDR-480 series offers a single output with a power rating of 480 watts, providing ample power for a wide range of industrial equipment and devices. It operates on a wide input voltage range of 90-264VAC, making it suitable for use in different regions worldwide. The power supply features a built-in active power factor correction (PFC) function, ensuring high efficiency and power factor correction.
This power supply is designed to withstand the demanding conditions of industrial environments. It has a wide operating temperature range of -25 to +70 degrees Celsius, allowing it to function reliably even in extreme temperatures. It is also equipped with various protection features, including overvoltage, overcurrent, and short-circuit protection, ensuring the safety and longevity of connected devices.
The SDR-480 series is compliant with international safety standards and holds certifications such as UL, CUL, TUV, CB, CE, and FCC. This ensures that the power supply meets the necessary safety and quality requirements for industrial applications.
With its compact and rugged design, the SDR-480 series is suitable for space-limited installations and can withstand harsh environmental conditions. It is a reliable and efficient power supply solution for industrial applications that require stable and consistent power delivery.
Overall, the 480W Single Output Industrial DIN RAIL Power Supply with PFC Function SDR-480 series is a dependable power supply option for industrial settings. Its high power output, PFC function, and robust protection features make it suitable for a wide range of industrial applications where reliable and efficient power supply is crucial.
Mean Well Power Supply SDR-480 Series Data Sheet Download
Specification
| MODEL | SDR-480-24 | SDR-480-48 | |
|
OUTPUT |
DC VOLTAGE | 24V | 48V |
| RATED CURRENT | 20A | 10A | |
| CURRENT RANGE | 0 ~ 20A | 0 ~ 10A | |
| RATED POWER | 480W | 480W | |
| PEAK CURRENT | 30A | 15A | |
| PEAK POWER Note.6 | 720W (3sec.) | ||
| RIPPLE & NOISE (max.) Note.2 | 100mVp-p | 120mVp-p | |
| VOLTAGE ADJ. RANGE | 24 ~ 28V | 48 ~ 55V | |
| VOLTAGE TOLERANCE Note.3 | ±1.2% | ±1.0% | |
| LINE REGULATION | ±0.5% | ±0.5% | |
| LOAD REGULATION | ±1.0% | ±1.0% | |
| SETUP, RISE TIME | 1500ms, 150ms/230VAC 3000ms, 150ms/115VAC at full load | ||
| HOLD UP TIME (Typ.) | 14ms/230VAC at full load | ||
|
INPUT |
VOLTAGE RANGE Note.7 | 90 ~ 264VAC 127 ~ 370VDC | |
| FREQUENCY RANGE | 47 ~ 63Hz | ||
| POWER FACTOR (Typ.) | 0.94/230VAC 0.99/115VAC at full load | ||
| EFFICIENCY (Typ.) | 94% | ||
| AC CURRENT (Typ.) | 5A/115VAC 2.5A/230VAC | ||
| INRUSH CURRENT (Typ.) | 40A/115VAC 80A/230VAC | ||
| LEAKAGE CURRENT | <0.8mA / 240VAC | ||
|
PROTECTION |
OVERLOAD |
Normally works within 110 ~ 150% rated output power for more than 3 seconds and then shut down o/p voltage with auto-recovery | |
| >150% rated power, constant current limiting with auto-recovery within 2 seconds and may cause to shut down if over 2 seconds | |||
|
OVER VOLTAGE |
29 ~ 33V | 56 ~ 65V | |
| Protection type: Shut down o/p voltage with auto-recovery or re-power on to recovery | |||
| OVER TEMPERATURE | Shut down o/p voltage, recovers automatically after temperature goes down | ||
| FUNCTION | DC OK REALY CONTACT RATINGS (max.) | 60Vdc/0.3A, 30Vdc/1A, 30Vac/0.5A resistive load | |
|
ENVIRONMENT |
WORKING TEMP. Note.5 | -25 ~ +70℃ (Refer to “Derating Curve”) | |
| WORKING HUMIDITY | 20 ~ 95% RH non-condensing | ||
| STORAGE TEMP., HUMIDITY | -40 ~ +85℃, 10 ~ 95% RH | ||
| TEMP. COEFFICIENT | ±0.03%/℃ (0 ~ 50℃) | ||
| VIBRATION | Component:10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes; Mounting: Compliance to IEC60068-2-6 | ||
|
SAFETY & EMC (Note 4) |
SAFETY STANDARDS | UL508, TUV BS EN/EN62368-1, AS/NZS 62368.1, EAC TP TC 004, BSMI CNS14336-1 approved ; (meet BS EN/EN60204-1) | |
| WITHSTAND VOLTAGE | I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC O/P-DC OK:0.5KVAC | ||
| ISOLATION RESISTANCE | I/P-O/P, I/P-FG, O/P-FG:>100M Ohms / 500VDC / 25℃/ 70% RH | ||
| EMC EMISSION | Compliance to BS EN/EN55032 (CISPR32), BS EN/EN61204-3 Class B, BS EN/EN61000-3-2, -3, EAC TP TC 020, CNS13438 | ||
|
EMC IMMUNITY |
Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11, BS EN/EN55035, BS EN/EN61000-6-2 (BS EN/EN50082-2),
BS EN/EN61204-3, heavy industry level, EAC TP TC 020, SEMI F47 approved |
||
|
OTHERS |
MTBF | 964.2K hrs min. Telcordia SR-332 (Bellcore); 91.9K hrs min. MIL-HDBK-217F (25℃) | |
| DIMENSION | 85.5*125.2*128.5mm (W*H*D) | ||
| PACKING | 1.6Kg; 8pcs/13.8Kg/0.9CUFT | ||
