MW Mean Well Meanwell 240W Slim Three Phase Industrial DIN Rail with PFC Function TDR-240 Series

Features

Three-Phase 340 ~ 550VAC wide range input (Dual phase operation possible)
63mm slim width
Built-in passive PFC function compliance to BS EN/EN61000-3-2
High efficiency 92% and low power dissipation
Protections: Short circuit / Overload / Over voltage / Over temperature
Cooling by free air convection
Full power between -30~+60°c
Built-in constant current limiting circuit
Can be installed on DIN rail TS-35/7.5 or 15
UL61010(industrial control equipment)approved
BS EN/EN61000-6-2(BS EN/EN50082-2) industrial immunity level
DC OK relay contact
3 years warranty

Description

TDR-240 is one economical slim 240W Din rail power supply series, adapt to be installed on TS-35/7.5 or TS-35/15 mounting rails. The body is designed 63mm in width, which allows space saving inside the cabinets. The entire series adopts the full range AC input from 3 0 340VAC to 550VAC (Dual Phase operation possible) and conforms to BS EN/EN61000-3-2, the norm the European Union regulates for harmonic current. TDR-240 is designed with metal housing that enhances the unit’s power dissipation. With working efficiency up to 92 %, the entire series can operate at the ambient temperature between -30℃ and 70℃ under air convection. It is equipped with constant current mode for over-load protection, fitting various inductive or capacitive applications. The complete protection functions and relevant certificates for industrial control apparatus (UL61010-1,UL61010-2-201,BSEN/EN61558-1,BSEN/EN61558-2-16,EAC TP TC 004 approved, and etc.) make TDR-240 avery competitive power supply solution for industrial applications.

Mean Well Power Supply TDR-240 Series Model Encoding

Mean Well Power Supply TDR-240 Series Data Sheet Download

240W Slim Three Phase Industrial DIN Rail with PFC Function TDR-240 Series

Specification

MODEL		TDR-240-24		TDR-240-48
OUTPUT	DC VOLTAGE	24V		48V
	RATED CURRENT	10A		5A
	CURRENT RANGE	0 ~ 10A		0 ~ 5A
	RATED POWER	240W		240W
	RIPPLE & NOISE (max.) Note.2	100mVp-p		120mVp-p
	VOLTAGE ADJ. RANGE	24 ~ 28V		48 ~ 55V
	VOLTAGE TOLERANCE Note.3	±1.0%		±1.0%
	LINE REGULATION	±0.5%		±0.5%
	LOAD REGULATION	±1.0%		±1.0%
	SETUP, RISE TIME	2000ms, 60ms/400VAC 1500ms, 60ms/500VAC at full load
	HOLD UP TIME (Typ.)	20ms / 400VAC 40ms / 500VAC at full load
INPUT	VOLTAGE RANGE Note.4	Three-Phase 340 ~ 550VAC (Dual phase operation possible in connecting L1,L3,FG or L2,L3,FG) or 480 ~ 780VDC
	FREQUENCY RANGE	47 ~ 63Hz
	POWER FACTOR (Typ.)	PF≧0.53/400VAC PF≧0.52/500VAC at full load
	EFFICIENCY (Typ.)	92%		92%
	AC CURRENT (Typ.)	0.69A/400VAC 0.6A/500VAC
	INRUSH CURRENT (Typ.)	COLD START 50A
	LEAKAGE CURRENT	<2mA / 530VAC
PROTECTION	OVERLOAD	105 ~ 130% rated output power
		Protection type: Constant current limiting, unit will hiccup after 3 sec.
	OVER VOLTAGE	30 ~ 36V		56 ~ 65V
		Protection type : Hiccup mode, recovers automatically after fault condition is removed.
	OVER TEMPERATURE	Shut down o/p voltage, recovers automatically after temperature goes down
FUNCTION	DC OK REALY CONTACT RATINGS (max.)	60VDC/0.3A, 30VDC/1A, 30VAC/0.5A resistive load
ENVIRONMENT	WORKING TEMP. Note.5	-30 ~ +70℃ (Refer to “Derating Curve”)
	WORKING HUMIDITY	20 ~ 95% RH non-condensing
	STORAGE TEMP., HUMIDITY	-40 ~ +85℃, 10 ~ 95% RH non-condensing
	TEMP. COEFFICIENT	±0.05%/℃ (0 ~ 60℃)
	VIBRATION	Component:10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes; Mounting: Compliance to IEC60068-2-6
	OPERATING ALTITUDE Note.6	5000 meters
	OVER VOLTAGE CATEGORY	Ⅲ; According to EN61558, EN50178, EN60664-1, EN62477-1, EN60204-1; altitude up to 2000 meters
SAFETY & EMC (Note 7)	SAFETY STANDARDS	UL61010-1, UL61010-2-201, BS EN/EN61558-1, BS EN/EN61558-2-16, BIS IS13252(Part1)(only for 24V), EAC TP TC 004 approved, design refer to AS/NZS61558-1/-2-16
	WITHSTAND VOLTAGE	I/P-O/P:4.87KVAC I/P-FG:2.4KVAC O/P-FG:0.5KVAC O/P-DC OK:0.5KVAC
	ISOLATION RESISTANCE	I/P-O/P, I/P-FG, O/P-FG:>100M Ohms / 500VDC / 25℃/ 70% RH
	EMC EMISSION	Parameter	Standard			Test Level / Note
		Conducted	BS EN/EN55032(CISPR32)/BS EN/EN61204-3			Class B
		Radiated	BS EN/EN55032(CISPR32)/BS EN/EN61204-3			Class B
		Harmonic Current	BS EN/EN61000-3-2			Class A
		Voltage Flicker	BS EN/EN61000-3-3			—–
	EMC IMMUNITY	BS EN/EN55035, BS EN/EN61204-3
		Parameter	Standard		Test Level / Note
		ESD	BS EN/EN61000-4-2		Level 4, 15KV air ; Level 4, 8KV contact
		Radiated Field	BS EN/EN61000-4-3		Level 3
		EFT / Burst	BS EN/EN61000-4-4		Level 3
		Surge	BS EN/EN61000-4-5		Level 4, 2KV / Line-Line, Level 4, 4KV/ Line-Earth
		Conducted	BS EN/EN61000-4-6		Level 3
		Magnetic Field	BS EN/EN61000-4-8		Level 4
		Voltage Dips and Interruptions	BS EN/EN61000-4-11		＞95% dip 0.5 periods, 30% dip 25 periods＞ 95% interruptions 250 periods
OTHERS	MTBF	1534.9K hrs min. Telcordia SR-332(Bellcore); 215.6K hrs min. MIL-HDBK-217F (25℃)
	DIMENSION	63125.2113.5mm (WHD)
	PACKING	1Kg; 12pcs/13Kg/1.22CUFT

Mean Well Power Supply TDR-240 Series Video Show

Find us on SNS

You can find us and know more about us on SNS:

TDR-240 series

SDR-960 series

TDR-480 series