MW Mean Well Meanwell 8W Single Output Switching Power Supply APV-8E series

Features

Constant current design
Class Ⅱ power unit, no FG
Fully isolated plastic case
IP42 design
Small and compact size
Cooling by free air convection
Protection: Short circuit
No load power consumption <0.5W
PF>0.5
100% full load burn-in test
Low cost / High reliability
2 years warranty

Mean Well LED Driver APV-8E Series Data Sheet Download

8W Single Output Switching Power Supply APV-8E series

Description

APV-8E series is one 8W AC/DC constant voltage mode single output LED power supply. It accepts input 180~264VAC and provides three models with different output voltage, 5V, 12V, 24V, respectively, that the small wattage LED applications employ the most frequently. Exploiting Class II design (without FG pin) and adopting the 94V-0 flame retardant plastic enclosure, APV-8E ideally fits the entry-level LED applications.

Mean Well LED Driver APV-8E Series Model Encoding

Specification

MODEL		APV-8E-5	APV-8E-12	APV-8E-24
OUTPUT	DC VOLTAGE	5V	12V	24V
	RATED CURRENT	1.4A	0.67A	0.34A
	CURRENT RANGE	0 ~ 1.4A	0 ~ 0.67A	0 ~ 0.34A
	RATED POWER	7W	8.04W	8.16W
	RIPPLE & NOISE (max.) Note.2	250mVp-p	250mVp-p	300mVp-p
	VOLTAGE TOLERANCE Note.3	±5.0%
	LINE REGULATION	±1.0%
	LOAD REGULATION	±2.0%
	SETUP, RISE TIME	500ms, 30ms / 230VAC
	HOLD UP TIME (Typ.)	20ms/230VAC at full load
INPUT	VOLTAGE RANGE Note.4	180 ~ 264VAC 254 ~ 370VDC (Note.6)
	FREQUENCY RANGE	47 ~ 63Hz
	POWER FACTOR (Typ.)	PF>0.5/230VAC at full load
	EFFICIENCY (Typ.)	74%	77.5%	78.5%
	AC CURRENT	0.15A/230VAC
	INRUSH CURRENT(Typ.)	COLD START 70A (twidth=120μs measured at 50% Ipeak) at 230VAC
	LEAKAGE CURRENT	0.25mA / 240VAC
PROTECTION	SHORT CIRCUIT	Hiccup mode, recovers automatically after fault condition is removed
	OVER LOAD	Above 105% rated output power
		Protection type: Hiccup mode, recovers automatically after fault condition is removed
	OVER VOLTAGE	5.75 ~ 6.75V	13.8 ~ 16V	27.6 ~ 32.4V
		Protection type: Shut off o/p voltage, clamping by zener diode
ENVIRONMENT	WORKING TEMP.	-30 ~ +70℃ (Refer to “Derating Curve”)
	WORKING HUMIDITY	20 ~ 90% RH non-condensing
	STORAGE TEMP., HUMIDITY	-40 ~ +80℃, 10 ~ 95% RH
	TEMP. COEFFICIENT	±0.03%/℃ (0 ~ 45℃)
	VIBRATION	10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
SAFETY & EMC	SAFETY STANDARDS	EAC TP TC 004, BS EN/EN62368-1 approved; design refer to UL8750, CSA C22.2 No.250.0-08;
	WITHSTAND VOLTAGE	I/P-O/P:3.75KVAC
	ISOLATION RESISTANCE	I/P-O/P:>100M Ohms / 500VDC / 25℃/ 70% RH
	EMC EMISSION	Compliance to BS EN/EN55032, BS EN/EN61000-3-2, BS EN/EN61000-3-3, EAC TP TC 020
	EMC IMMUNITY	Compliance to BS EN/EN55024, BS EN/EN61000-4-2,3,4,5,6,8,11; light industry level (surge 2KV), EAC TP TC 020
OTHERS	MTBF	9174.1K hrs min. Telcordia SR-332 (Bellcore); 1431.3K hrs min. MIL-HDBK-217F (25℃)
	DIMENSION	603023.5(LWH)
	PACKING	0.05Kg; 144pcs/7.6Kg/0.70CUFT

Applications

Suitable for LED related fixture or appliance (such as LED Decoration or Advertisement devices)

Mean Well LED Driver APV-8E Series Video Show

Find us on SNS

You can find us and know more about us on SNS:

APV-8E series

APC-16E series

APV-12E series