HVG-320 series
May 21, 2022
HVGC-65 series
May 22, 2022480W Constant Voltage + Constant Current LED Driver HVG-480 series
Features
- Wide input range 180 ~ 528VAC
- Constant Voltage + Constant Current mode output
- Metal housing with Class Ⅰ design
- Built-in active PFC function
- IP67 / IP65 rating for indoor or outdoor installations
- Function options: output adjustable via potentiometer; 3 in 1 dimming (dim-to-off); Smart timer dimming
- Typical lifetime>50000 hours
- 5 years warranty
Data Sheet Download
Description
HVG-480 series is a 480W AC/DC LED driver featuring the dual mode constant voltage and constant current output. HVG-480 operates from 180~528VAC and offers models with different rated voltage ranging between 24V and 54V. Thanks to the high efficiency up to 95%, with the fanless design, the entire series is able to operate for -40℃~+85℃ case temperature under free air convection. The design of metal housing and IP67/IP65 ingress protection level allows this series to fit both indoor and outdoor applications. HVG-480 is equipped with various function options, such as dimming methodologies, to provide the optimal design flexibility for LED lighting system.
Model Encoding
| Type | IP Level | Function | Note |
| A | IP65 | Io and Vo adjustable through built-in potentiometer. | In Stock |
| B | IP67 | 3 in 1 dimming function (0~10Vdc, 10V PWM signal and resistance) | In Stock |
| AB | IP65 | Io and Vo adjustable through built-in potentiometer &
3 in 1 dimming function (0~10Vdc, 10V PWM signal and resistance) |
In Stock |
| Dx | IP67 | Built-in Smart timer dimming function by user request. | By request |
| D2 | IP67 | Built-in Smart timer dimming and programmable function. | By request |
Specification
SPECIFICATION
| MODEL | HVG-480-24 | HVG-480-30 | HVG-480-36 | HVG-480-42 | HVG-480-48 | HVG-480-54 | |||
|
OUTPUT |
DC VOLTAGE | 24V | 30V | 36V | 42V | 48V | 54V | ||
| CONSTANT CURRENT REGION Note.4 | 12 ~ 24V | 15 ~ 30V | 18 ~ 36V | 21 ~ 42V | 24 ~ 48V | 27 ~ 54V | |||
| RATED CURRENT | 20A | 16A | 13.3A | 11.4A | 10A | 8.9A | |||
| RATED POWER | 480W | 480W | 478.8W | 478.8W | 480W | 480.6W | |||
| RIPPLE & NOISE (max.) Note.2 | 200mVp-p | 200mVp-p | 250mVp-p | 250mVp-p | 250mVp-p | 350mVp-p | |||
|
VOLTAGE ADJ. RANGE |
Adjustable for A/AB-Type only (via built-in potentiometer) | ||||||||
| 20.4 ~ 25.2V | 25.5 ~ 31.5V | 30.6 ~ 37.8V | 35.7 ~ 44.1V | 40.8 ~ 50.4V | 45.9 ~ 56.7V | ||||
|
CURRENT ADJ. RANGE |
Adjustable for A/AB-Type only (via built-in potentiometer) | ||||||||
| 10 ~ 20A | 8 ~ 16A | 6.6 ~ 13.3A | 5.7 ~ 11.4A | 5 ~ 10A | 4.4 ~ 8.9A | ||||
| VOLTAGE TOLERANCE Note.3 | ±1.0% | ±1.0% | ±1.0% | ±1.0% | ±1.0% | ±1.0% | |||
| LINE REGULATION | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | |||
| LOAD REGULATION | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | |||
| SETUP, RISE TIME | Note.6 | 500ms, 100ms / 230VAC, 347VAC, 480VAC | |||||||
| HOLD UP TIME (Typ.) | 16ms / 347VAC, 480VAC | ||||||||
|
INPUT |
VOLTAGE RANGE |
Note.5 |
180 ~ 528VAC 254VDC ~ 747VDC
(Please refer to “STATIC CHARACTERISTIC” section) |
||||||
| FREQUENCY RANGE | 47 ~ 63Hz | ||||||||
|
POWER FACTOR (Typ.) |
PF≧0.98/230VAC, PF≧0.98/277VAC, PF≧0.97/347VAC, PF≧0.95/480VAC @ full load
(Please refer to “POWER FACTOR (PF) CHARACTERISTIC” section) |
||||||||
|
TOTAL HARMONIC DISTORTION |
THD< 20% (@ load≧50% at 230VAC/277VAC/347VAC/480VAC input Please refer to “TOTAL HARMONIC DISTORTION (THD)” section | ||||||||
| EFFICIENCY (Typ.) | 94% | 94% | 94.5% | 95% | 95% | 95% | |||
| AC CURRENT (Typ.) | 1.52A / 347VAC 1.15A / 480VAC | ||||||||
| INRUSH CURRENT(Typ.) | COLD START 40A(twidth=1100μs measured at 50% Ipeak) at 480VAC ; Per NEMA 410 | ||||||||
| MAX. NO. of PSUs on 16A CIRCUIT BREAKER | 4unit(circuit breaker of type B) / 6units(circuit breaker of type C) at 480VAC | ||||||||
| LEAKAGE CURRENT | <0.75mA / 480VAC | ||||||||
|
PROTECTION |
OVER CURRENT | 95 ~ 108% | |||||||
| Constant current limiting, recovers automatically after fault condition is removed | |||||||||
| SHORT CIRCUIT | Constant current limiting, recovers automatically after fault condition is removed | ||||||||
|
OVER VOLTAGE |
26 ~ 30V | 32.5 ~ 36.5V | 39.5 ~ 45V | 46 ~ 50V | 51.5 ~ 58V | 58 ~ 65V | |||
| Shut down output voltage, re-power on to recovery | |||||||||
| OVER TEMPERATURE | Shut down output voltage, re-power on to recovery | ||||||||
|
ENVIRONMENT |
WORKING TEMP. | Tcase=-40 ~ +85℃(Please refer to “OUTPUT LOAD vs TEMPERATURE” section) | |||||||
| MAX. CASE TEMP. | Tcase=+85℃ | ||||||||
| WORKING HUMIDITY | 20 ~ 95% RH non-condensing | ||||||||
| STORAGE TEMP., HUMIDITY | -40 ~ +80℃, 10 ~ 95% RH non-condensing | ||||||||
| TEMP. COEFFICIENT | ±0.03%/℃ (0 ~ 60℃) | ||||||||
| VIBRATION | 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes | ||||||||
|
SAFETY & EMC |
SAFETY STANDARDS | UL8750 (type”HL”), CSA C22.2 No. 250.13-12, IP65 or IP67, EAC TP TC 004 approved | |||||||
| WITHSTAND VOLTAGE | I/P-O/P:3.75KVAC | I/P-FG:2KVAC | O/P-FG:1.5KVAC | ||||||
| ISOLATION RESISTANCE | I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH | ||||||||
| EMC EMISSION | Compliance to FCC Part 15 Subpart B, EAC TP TC 020 | ||||||||
| EMC IMMUNITY | Immunity Line-Earth 4KV, Line-Line 2KV, EAC TP TC 020 | ||||||||
|
OTHERS |
MTBF | 318.9K hrs min. Telcordia SR-332(Bellcore) ; 84.5K hrs min. MIL-HDBK-217F (25℃) | |||||||
| DIMENSION | 262*125*43.8mm (L*W*H) | ||||||||
| PACKING | 2.8Kg; 4pcs/12.2Kg/0.55CUFT | ||||||||
Application
- LED greenhouse lighting
- LED statium lighting
- LED mining lighting
- Type “HL” for use in Class I, Division 2 hazardous (Classified) location
