LPC-60 series
November 13, 2022
LPC-150 series
November 13, 2022100W Single Output Switching Power Supply LPC-100 series
Features
- Constant current design
- Universal AC input / Full range
- Withstand 300VAC surge input for 5 seconds
- High efficiency up to 90%
- Protections: Short circuit / Over voltage
- Cooling by free air convection
- Fully encapsulated with IP67 level (Note.7)
- Fully isolated plastic case
- Class II power unit, no FG
- 100% full load burn-in test
- Low cost, high reliability
- 2 years warranty
LPC-100 Series Data Sheet Download
Description
LPC-100 series is one 100W single output AC/DC LED switching power supply. It features the constant current design, providing various models with the output current ranging from 350mA, through 2100mA the LED lighting applications employ the most frequently.
LPC-100 operates for the range 90~264VAC so it can perfectly work for most of the countries in the world. The whole series is based on class II (without FG pin) design, housed with a 94V-0 flame retardant plastic case. With the working efficiency up to 90%, LPC-100 can work at the ambient temperature between -25℃~+50℃ under air convection.
Model Encoding
Specification
| MODEL | LPC-100-350 | LPC-100-500 | LPC-100-700 | LPC-100-1050 | LPC-100-1400 | LPC-100-1750 | LPC-100-2100 | |
|
OUTPUT |
RATED CURRENT | 350mA | 500mA | 700mA | 1050mA | 1400mA | 1750mA | 2100mA |
| CURRENT ACCURACY | ±5.0% | |||||||
| CONSTANT CURRENT REGION Note.5 | 143 ~ 286V | 100 ~ 200V | 72 ~ 143V | 48 ~ 96V | 36 ~ 72V | 29 ~ 58V | 24 ~ 48V | |
| RATED POWER | 100.1W | 100W | 100.1W | 100.8W | 100.8W | 101.5W | 100.8W | |
| RIPPLE CURRENT | ±5% | |||||||
| RIPPLE & NOISE | 1.5Vp-p | 1.5Vp-p | 1Vp-p | 1Vp-p | 1Vp-p | 1Vp-p | 1Vp-p | |
| LINE REGULATION | ±1% | |||||||
| VOLTAGE TOLERANCE | ±1.5% | |||||||
| SETUP, RISE TIME | 1000ms, 80ms / 230VAC 2000ms,80ms/115VAC at full load | |||||||
| HOLD UP TIME (Typ.) | 16ms/230VAC 10ms/115vac at full load | |||||||
|
INPUT |
VOLTAGE RANGE Note.2 | 90 ~ 264VAC 127VDC ~ 370VDC | ||||||
| FREQUENCY RANGE | 47 ~ 63Hz | |||||||
| EFFICIENCY (Typ.) | 90% | 89.5% | 89% | |||||
| AC CURRENT (Typ.) | 2.2 A / 115VAC 1.2A / 230VAC | |||||||
| INRUSH CURRENT (Typ.) | COLD START 75A (twidth=980μs measured at 50% Ipeak) at 230VAC | |||||||
| MAX. No. of PSUs on 16A CIRCUIT BREAKER | 1 unit (circuit breaker of type B) / 2 units (circuit breaker of type C) at 230VAC | |||||||
| LEAKAGE CURRENT | <0.25mA / 240VAC | |||||||
|
PROTECTION |
SHORT CIRCUIT | Hiccup mode, recovers automatically after fault condition is removed | ||||||
| OVER VOLTAGE | 315 ~ 345V | 220 ~ 240V | 160 ~ 172V | 108 ~ 120V | 80 ~ 97V | 65 ~ 80V | 58 ~ 68V | |
| Protection type: Shut down and latch off o/p voltage re-power on to recovery | ||||||||
|
ENVIRONMENT |
WORKING TEMP. | -25 ~ +50℃ (Refer to “Derating Curve”) | ||||||
| WORKING HUMIDITY | 10 ~ 95% RH non-condensing | |||||||
| STORAGE TEMP., HUMIDITY | -40 ~ +80℃, 10 ~ 95% RH | |||||||
| TEMP. COEFFICIENT | ±0.03%/℃ (0 ~ 50℃) | |||||||
| VIBRATION | 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes | |||||||
|
SAFETY & EMC |
SAFETY STANDARDS | IEC 62368-1; EAC TP TC 004, IP67, BS EN/EN62368-1 approved | ||||||
| WITHSTAND VOLTAGE | I/P-O/P:3KVAC | |||||||
| ISOLATION RESISTANCE | I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH | |||||||
| EMC EMISSION | Compliance to BS EN/EN55032(CISPR32) Class B; BS EN/EN61000-3-2 Class A (≦80% load); BS EN/EN61000-3-3, EAC TP TC 020 | |||||||
| EMC IMMUNITY | Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11, BS EN/EN55024, light industry level, EAC TP TC 020 | |||||||
|
OTHERS |
MTBF | 4121.8K hrs min. Telcordia SR-332 (Bellcore); 511.2K hrs min. MIL-HDBK-217F (25℃) | ||||||
| DIMENSION | 190*52*37mm (L*W*H) | |||||||
| PACKING | 0.61Kg; 20pcs/13.2Kg/0.55CUFT | |||||||
Applications
Suitable for LED related fixture or appliance (such as LED Decoration or Advertisement devices)
