NPF-120 series
November 20, 2022
APC-8E series
January 23, 2023MW Mean Well Meanwell 200W Constant Voltage + Constant Current LED Driver NPF-200 series
Features
- Plastic housing with Class II and PFC design
- Constant Voltage + Constant Current mode output
- No load power consumption <0.5W
- IP67 rating for indoor or outdoor installations
- Dimming function: 3 in 1 Dimming(C.V Dim. only) to adjust output voltage level
- Flicker free Design
- Typical lifetime>50000 hours
- 5 years warranty
Mean Well LED Driver NPF-200 Series Data Sheet Download
Description
NPF-200 series is a 200W AC/DC LED driver featuring the constant current or constant voltage mode output. NPF-200 operates from 100~305VAC and offers models with different rated voltage ranging between 12V and 54V. The models are 12V(NPF-200-12 and NPF-200V-12), 24V(NPF-200-24 and NPF-200V-24), 36V(NPF-200-36 and NPF-200V-36), 42V(NPF-200-42 and NPF-200V-42), 48V(NPF-200-48 and NPF-200V-48), 54V(NPF-200-54 and NPF-200V-54). Thanks to the high efficiency up to 94% with the fanless design, the entire series is able to operate for -40℃~+85℃ case temperature under free air convection. The entire series is rated with IP67 ingress protection level and is suitable to work for a variety of applications at dry, damp or wet locations. NPF-200 is particular design without flicker Dimming Function which is suitable for LED strip or Poultry lighting applications.
In NPF family, there are NPF-40D series, NPF-40 series, NPF-60D series, NPF-60 series, NPF-90D series, NPF-90 series, NPF-120D series, NPF-120 series and NPF-200 series.
Mean Well LED Driver NPF-200 Series Model Encoding
| Type | IP Level | Function | Note |
| Blank | IP67 | Constant Voltage + Constant current mode output | In Stock |
| V | IP67 | 3 in 1 dimming function to adjust output voltage (C.V Dimming) | In Stock |
Specification
| MODEL | NPF-200 -12 | NPF-200 -24 | NPF-200 -36 | NPF-200 -42 | NPF-200 -48 | NPF-200 -54 | |
|
OUTPUT |
DC Voltage | 12V | 24V | 36V | 42V | 48V | 54V |
| CONSTANT CURRENT AND OUTPUT VOLTAGE REGION | 6 ~ 12V | 12~24V | 18 ~ 36V | 21 ~ 42V | 24 ~ 48V | 27 ~ 54V | |
| RATED CURRENT | 15A | 8.3A | 5.55A | 4.75A | 4.17A | 3.71A | |
| RATED POWER | 180W | 199.2W | 199.8W | 199.5W | 200.1W | 200.3W | |
| RIPPLE & NOISE (max.) Note.9 | 150mVp-p | 150mVp-p | 200mVp-p | 250mVp-p | 250mVp-p | 350mVp-p | |
| VOLTAGE TOLERANCE Note.10 | ±4.0% | ±4.0% | ±2.0% | ±2.0% | ±2.0% | ±2.0% | |
| LINE REGULATION | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | |
| LOAD REGULATION | ±2.0% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | |
| CURRENT TOLERANCE | ±5.0% | ||||||
| SET UP TIME Note.3 | 500ms/230VAC or 115VAC | ||||||
| RISE TIME | 80ms for Blank type, 200ms for V-type | ||||||
| HOLD UP TIME (Typ.) | 10ms/230VAC or 115VAC | ||||||
|
INPUT |
VOLTAGE RANGE Note.2 | 100 ~ 305VAC 142 ~ 431VDC
(Please refer to “STATIC CHARACTERISTIC” section) |
|||||
| FREQUENCY RANGE | 47 ~ 63Hz | ||||||
| POWER FACTOR (Typ.) | PF≧0.97/115VAC, PF≧0.96/230VAC, PF≧0.94/277VAC@full load
(Please refer to “POWER FACTOR (PF) CHARACTERISTIC” section) |
||||||
| TOTAL HARMONIC DISTORTION | THD< 20% (@load≧60%/115VC, 230VAC; @load≧75%/277VAC)
(Please refer to “TOTAL HARMONIC DISTORTION(THD)” section) |
||||||
| EFFICIENCY(Typ.) | 92% | 93% | 94% | 94% | 94% | 94% | |
| AC CURRENT (Typ.) | 2.2A / 115VAC 1.1A / 230VAC 0.9A / 277VAC | ||||||
| INRUSH CURRENT(Typ.) | COLD START 65A (twidth=550 μs measured at 50% Ipeak) at 230VAC; Per NEMA 410 | ||||||
| MAX. NO. of PSUs on 16A CIRCUIT BREAKER | 3 units (circuit breaker of type B) / 5 units (circuit breaker of type C) at 230VAC | ||||||
| LEAKAGE CURRENT | <0.25mA / 277VAC | ||||||
| STANDBY POWER CONSUMPTION | <0.5W for V-type only (Output voltage dim to off) | ||||||
|
PROTECTION |
OVER CURRENT | 95 ~ 108% | |||||
| Hiccup mode or Constant current limiting, recovers automatically after fault condition is removed | |||||||
| SHORT CIRCUIT | Hiccup mode or Constant current limiting, recovers automatically after fault condition is removed | ||||||
|
OVER VOLTAGE |
13 ~ 18V | 27 ~ 34V | 41 ~ 49V | 46 ~ 57V | 53 ~ 65V | 59 ~ 70V | |
| Shut down o/p voltage, re-power on to recover | |||||||
| OVER TEMPERATURE | Shut down o/p voltage, re-power on to recover | ||||||
|
ENVIRONMENT |
WORKING TEMP. | Tcase=-40 ~ +85℃ (Please refer to “OUTPUT LOAD vs TEMPERATURE” section) | |||||
| MAX. CASE TEMP. | Tcase=+85℃ | ||||||
| WORKING HUMIDITY | 20 ~ 95% RH non-condensing | ||||||
| STORAGE TEMP., HUMIDITY | -40 ~ +80℃, 10 ~ 95% RH | ||||||
| TEMP. COEFFICIENT | ±0.03%/℃ (0 ~ 40℃) | ||||||
| VIBRATION | 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes | ||||||
|
SAFETY & EMC |
SAFETY STANDARDS |
UL8750(type”HL”), CSA C22.2 No. 250.13-12, According to BS EN/EN61347-2-13 appendix J suitable for emergency installations. ENEC BS EN/EN61347-1, BS EN/EN61347-2-13, BS EN/EN62384 independent, EAC TP TC 004, GB19510.1, GB19510.14, IP67 approved; Design refers to BS EN/EN60335-1 | |||||
| WITHSTAND VOLTAGE | I/P-O/P:3.75KVAC | ||||||
| ISOLATION RESISTANCE | I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH | ||||||
| EMC EMISSION | Compliance to BS EN/EN55015, BS EN/EN61000-3-2 Class C (@ load≧60%); BS EN/EN61000-3-3; GB17743 and GB17625.1, EAC TP TC 020 | ||||||
| EMC IMMUNITY | Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11; BS EN/EN61547, light industry level (surge immunity Line-Line 2KV); EAC TP TC 020 | ||||||
|
OTHERS |
MTBF | 2625.4K hrs min. Telcordia SR-332 (Bellcore); 247.5K hrs min. MIL-HDBK-217F (25℃) | |||||
| DIMENSION | 195*68*39.5mm (L*W*H) | ||||||
| PACKING | 1.03Kg; 12pcs/ 13.4Kg/ 0.71CUFT | ||||||
Applications
- LED panel lighting
- LED downlight
- LED decorative lighting
- Industrial lighting
- Sign board and back light
- LED strip lighting(C.V Dimming)
- Agricultural lighting(C.V Dimming)
- Poultry lighting (C.V Dimming)
- Type “HL” for use in Class I, Division 2 hazardous (Classified) location
