MW Mean Well Meanwell 480W Single Output Industrial Switching Power Supply DIN Rail with PFC Function SDR-480 Series

Features

High efficiency 94% and low power dissipation
150% peak load capability
Built-in active PFC function, PF>0.94
Protections: Short circuit / Overload / Over voltage / Over temperature
Cooling by free air convection
Built-in constant current limiting circuit
Can be installed on DIN rail TS-35/7.5 or 15
UL 508(industrial control equipment)approved
BS EN/EN61000-6-2(BS EN/EN50082-2) industrial immunity level
Built-in DC OK relay contact
100% full load burn-in test
3 years warranty

Description

The SDR-480 series offers a single output with a power rating of 480 watts, providing ample power for a wide range of industrial equipment and devices. It operates on a wide input voltage range of 90-264VAC, making it suitable for use in different regions worldwide. The power supply features a built-in active power factor correction (PFC) function, ensuring high efficiency and power factor correction.

This power supply is designed to withstand the demanding conditions of industrial environments. It has a wide operating temperature range of -25 to +70 degrees Celsius, allowing it to function reliably even in extreme temperatures. It is also equipped with various protection features, including overvoltage, overcurrent, and short-circuit protection, ensuring the safety and longevity of connected devices.

The SDR-480 series is compliant with international safety standards and holds certifications such as UL, CUL, TUV, CB, CE, and FCC. This ensures that the power supply meets the necessary safety and quality requirements for industrial applications.

With its compact and rugged design, the SDR-480 series is suitable for space-limited installations and can withstand harsh environmental conditions. It is a reliable and efficient power supply solution for industrial applications that require stable and consistent power delivery.

Overall, the 480W Single Output Industrial DIN RAIL Power Supply with PFC Function SDR-480 series is a dependable power supply option for industrial settings. Its high power output, PFC function, and robust protection features make it suitable for a wide range of industrial applications where reliable and efficient power supply is crucial.

Mean Well Power Supply SDR-480 Series Data Sheet Download

480W Single Output Switching Power Supply SDR-480 Series

Specification

MODEL		SDR-480-24	SDR-480-48
OUTPUT	DC VOLTAGE	24V	48V
	RATED CURRENT	20A	10A
	CURRENT RANGE	0 ~ 20A	0 ~ 10A
	RATED POWER	480W	480W
	PEAK CURRENT	30A	15A
	PEAK POWER Note.6	720W (3sec.)
	RIPPLE & NOISE (max.) Note.2	100mVp-p	120mVp-p
	VOLTAGE ADJ. RANGE	24 ~ 28V	48 ~ 55V
	VOLTAGE TOLERANCE Note.3	±1.2%	±1.0%
	LINE REGULATION	±0.5%	±0.5%
	LOAD REGULATION	±1.0%	±1.0%
	SETUP, RISE TIME	1500ms, 150ms/230VAC 3000ms, 150ms/115VAC at full load
	HOLD UP TIME (Typ.)	14ms/230VAC at full load
INPUT	VOLTAGE RANGE Note.7	90 ~ 264VAC 127 ~ 370VDC
	FREQUENCY RANGE	47 ~ 63Hz
	POWER FACTOR (Typ.)	0.94/230VAC 0.99/115VAC at full load
	EFFICIENCY (Typ.)	94%
	AC CURRENT (Typ.)	5A/115VAC 2.5A/230VAC
	INRUSH CURRENT (Typ.)	40A/115VAC 80A/230VAC
	LEAKAGE CURRENT	<0.8mA / 240VAC
PROTECTION	OVERLOAD	Normally works within 110 ~ 150% rated output power for more than 3 seconds and then shut down o/p voltage with auto-recovery
		>150% rated power, constant current limiting with auto-recovery within 2 seconds and may cause to shut down if over 2 seconds
	OVER VOLTAGE	29 ~ 33V	56 ~ 65V
		Protection type: Shut down o/p voltage with auto-recovery or re-power on to recovery
	OVER TEMPERATURE	Shut down o/p voltage, recovers automatically after temperature goes down
FUNCTION	DC OK REALY CONTACT RATINGS (max.)	60Vdc/0.3A, 30Vdc/1A, 30Vac/0.5A resistive load
ENVIRONMENT	WORKING TEMP. Note.5	-25 ~ +70℃ (Refer to “Derating Curve”)
	WORKING HUMIDITY	20 ~ 95% RH non-condensing
	STORAGE TEMP., HUMIDITY	-40 ~ +85℃, 10 ~ 95% RH
	TEMP. COEFFICIENT	±0.03%/℃ (0 ~ 50℃)
	VIBRATION	Component:10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes; Mounting: Compliance to IEC60068-2-6
SAFETY & EMC (Note 4)	SAFETY STANDARDS	UL508, TUV BS EN/EN62368-1, AS/NZS 62368.1, EAC TP TC 004, BSMI CNS14336-1 approved ; (meet BS EN/EN60204-1)
	WITHSTAND VOLTAGE	I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC O/P-DC OK:0.5KVAC
	ISOLATION RESISTANCE	I/P-O/P, I/P-FG, O/P-FG:>100M Ohms / 500VDC / 25℃/ 70% RH
	EMC EMISSION	Compliance to BS EN/EN55032 (CISPR32), BS EN/EN61204-3 Class B, BS EN/EN61000-3-2, -3, EAC TP TC 020, CNS13438
	EMC IMMUNITY	Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11, BS EN/EN55035, BS EN/EN61000-6-2 (BS EN/EN50082-2), BS EN/EN61204-3, heavy industry level, EAC TP TC 020, SEMI F47 approved
OTHERS	MTBF	964.2K hrs min. Telcordia SR-332 (Bellcore); 91.9K hrs min. MIL-HDBK-217F (25℃)
	DIMENSION	85.5125.2128.5mm (WHD)
	PACKING	1.6Kg; 8pcs/13.8Kg/0.9CUFT

Mean Well Power Supply SDR-480 Series Video Show

Find us on SNS

You can find us and know more about us on SNS: