MW Mean Well Meanwell 500W Single Output with PFC Function Power Supply EPP-500 Series

Features

5″x3″ compact size
320W convection, 500W force air
550W peak power (3sec.)
EMI for both Class I & Class II configuration
-30~+70℃ wide range operating temperature
No load power consumption<0.5W by PS_ON control
High efficiency up to 94%
Protections: Short circuit / Overload / Over voltage / Over temperature
5Vdc standby output, 12Vdc fan supply, Power Good, Power Fail and remote sense
Operating altitude up to 5000 meters
LED indicator for power on
3 years warranty

Mean Well Power Supply EPP-500 Series Data Sheet Download

500W Single Output Power Supply EPP-500 Series

Description

EPP-500 is a 500W highly reliable green PCB type power supply with a high power density on the 5 by 3 footprint. It accepts 80~264VAC input and offers various output voltages between 12V and 54V. The working efficiency is up to 94% and the extremely low no load power consumption is down below 0.5W. EPP-500 is able to be used for both ClassⅠ(with FG) and Class Ⅱ (no FG) system design. EPP-500 has complete protection functions; it is complied with the international safety regulations such as TUV BS EN/EN62368-1,TUV BS EN/EN60335-1,UL62368-1 and IEC62368-1. EPP-500 series serves as a high price-to-performance power supply solution for various industrial applications.

In Mean Well open frame green PCB type, there are EPS-15, EPS-25, EPS-35, EPS-45S, EPS-65S, EPP-120S, EPS-45, EPS-65, EPS-120, EPP-100, EPP-150, EPP-200, EPP-300, EPP-400, EPP-500 and ELP-75.

Mean Well Power Supply EPP-500 Series Model Encoding

Specification

MODEL

EPP-500-12

EPP-500-15

EPP-500-18

EPP-500-24

EPP-500-27

EPP-500-36

EPP-500-48

EPP-500-54

OUTPUT

DC VOLTAGE

12V

15V

18V

24V

27V

36V

48V

54V

CURRENT

25CFM

41.6A

33.3A

27.8A

20.8A

18.5A

13.9A

10.4A

9.26A

Convection

26.7A

21.3A

17.8A

13.4A

11.9A

8.9A

6.7A

5.93A

RATED

POWER

Note.5

25CFM

499.2W

499.5W

500.4W

499.2W

499.5W

500.4W

499.2W

500W

Convection

320.4W

319.5W

320.4W

321W

321.3W

320.4W

321.6W

320.2W

PEAK POWER(3sec.)

550W

RIPPLE & NOISE (max.) Note.2

200mVp-p

VOLTAGE ADJ. RANGE(MAIN OUTPUT)

11.4〜12.6V

14.3〜15.8V

17.1〜18.9V

22.8~25.2V

25.6 ~ 28.4V

34.2 ~37.8V

45.6 ~50.4V

51 ~56V

VOLTAGE TOLERANCE Note.3

±3.0%

±2.0%

±1.0%

LINE REGULATION

±0.5%

LOAD REGULATION

±1.0%

SETUP, RISE TIME

1000ms, 30ms/230VAC 1500ms, 30ms/115VAC at full load

HOLD UP TIME (Typ.)

10ms/230VAC 10ms/115VAC at full load

INPUT

VOLTAGE RANGE Note.4

80 ~ 264VAC 113 ~ 370VDC

FREQUENCY RANGE

47 ~ 63Hz

POWER FACTOR

PF>0.94/230VAC PF>0.98/115VAC at full load

EFFICIENCY (Typ.)

91%

92%

92.5%

93%

93.5%

94%

AC CURRENT (Typ.)

5.8A/115VAC 2.9A/230VAC

INRUSH CURRENT (Typ.)

COLD START 40A/115VAC 80A/230VAC

LEAKAGE CURRENT

<0.75mA / 240VAC

PROTECTION

OVERLOAD

105 ~ 135% rated output power

Protection type : Hiccup mode, recovers automatically after fault condition is removed

OVER VOLTAGE

13.2 ~ 15.6V

16.5 ~ 19.5V

19.8 ~23.4V

26.4 ~ 31.2V

29.7 ~ 35.1V

39.6 ~ 46.8V

52.8 ~ 62.4V

56.7~59.4V

Protection type : Hiccup mode, recovers automatically after fault condition is removed

OVER TEMPERATURE

Protection type : Shut down o/p voltage, recovers automatically after temperature goes down

FUNCTION

5V STANDBY

5Vsb : [email protected] without fan, 1A with fan 25CFM ; tolerance ±2%, ripple : 120mVp-p(max.)

12V FAN SUPPLY

[email protected] for driving a fan ;

tolerance -15% ~+10% at main output 20% rated current (25CFM)

PS-ON INPUT SIGNAL

Power on: PS-ON = “Hi” or ” > 2 ~ 5V”;

Power off: PS-ON = “Low” or ” < 0 ~ 0.5 V”

POWER GOOD / POWER FAIL

500ms>PG>10ms ; The TTL signal goes high with 10ms to 500ms delay after power set up ; The TTL signal goes low at least 1ms before Vo below 90% of rated value

ENVIRONMENT

WORKING TEMP.

-30 ~ +70℃ (Refer to “Derating Curve”)

WORKING HUMIDITY

20 ~ 90% RH non-condensing

STORAGE TEMP.

-40 ~ +85℃

TEMP. COEFFICIENT

±0.03%/℃ (0 〜50℃)

VIBRATION

10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes

OPERATING ALTITUDE Note.5

5000 meters

SAFETY & EMC (Note 6)

SAFETY STANDARDS

UL62368-1, TUV BS EN/EN62368-1, BS EN/EN60335-1, IEC62368-1, EAC TP TC 004 approved

WITHSTAND VOLTAGE

I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC

ISOLATION RESISTANCE

I/P-O/P, I/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH

EMC EMISSION

Parameter

Standard

Test Level / Note

Conducted

BS EN/EN55032(CISPR32), CNS13438

Class I : Class B , Class II: Class A

Radiated

BS EN/EN55032(CISPR32), CNS13438

Class A

Harmonic Current

BS EN/EN61000-3-2

Class A

Voltage Flicker

BS EN/EN61000-3-3

EMC IMMUNITY

BS EN/EN55024, BS EN/EN61000-6-2

Parameter

Standard

Test Level /Note

ESD

BS EN/EN61000-4-2

Level 3, 8KV air; Level 2, 4KV contact, criteria A

Radiated Susceptibility

BS EN/EN61000-4-3

Level 3, criteria A

EFT/Burest

BS EN/EN61000-4-4

Level 3, criteria A

Surge

BS EN/EN61000-4-5

Level 4,2KV/L-N, criteria A

Conducted

BS EN/EN61000-4-6

Level 3, criteria A

Magnetic Field

BS EN/EN61000-4-8

Level 4, criteria A

Voltage Dips and interruptions

BS EN/EN61000-4-11

>95% dip 0. 5 periods, 30% dip 25 periods, >95% interruptions 250 periods

OTHERS

MTBF

1133.6K hrs min. Telcordia SR-332 (Bellcore) ; 137.1K hrs min. MIL-HDBK-217F (25℃)

DIMENSION

L*W*H

127×76.2x41mm

5″x3″x1.61″inch

PACKING

P.W.

0.46Kg

Q’TY

30pcs

G.W.

14.8Kg

M’MENT

0.96CUFT

Applications

Industrial automation machinery
Industrial control system
Mechanical and electrical equipment
Electronic instruments, equipments or apparatus
Power sourcing equipment of PoE

Mean Well Power Supply EPP-500 Series Video Show

Find us on SNS

You can find us and know more about us on SNS:

MW Mean Well Meanwell 500W Single Output with PFC Function Power Supply EPP-500 Series

Features

Mean Well Power Supply EPP-500 Series Data Sheet Download

Description

Mean Well Power Supply EPP-500 Series Model Encoding

Specification

Applications

Mean Well Power Supply EPP-500 Series Video Show

Find us on SNS

EPP-400 series

EPP-300 series

EPP-200 series