MW Mean Well Meanwell 60W DIN Rail Type DC-DC Converter DDR-60 Series

Features

Width only 52.5mm (3SU)
4:1 ultra wide input range
-40~+85℃ wide working temperature
No minimum load required
DC output adjustable (±10%)
Cooling by free air convection
Can be installed on DIN rail TS-35/7.5 or 15
Protections: Short circuit / Overload / Over voltage / Input reverse polarity / Input under voltage protection
4KVdc I/O isolation(Reinforced isolation)
3 years warranty

Mean Well DC-DC Converter DDR-60 Series Data Sheet Download

Mean Well 60W DIN Rail Type DC-DC Converter DDR-60 Series

Description

DDR-60 series is a 60W DIN Rail type DC-DC converter with main features including DIN rail-type easy installation, ultra slim width (52.5mm), 4:1 ultra wide input voltage, -40~+85℃ wide operating temperature, 4KVdc I/O isolation, adjustable output voltage (± 10%) and full protective functions…etc. This series has two input options: 9~36V /18~75V and various output options: 5V / 12V / 15V / 24V and can be used for industrial control, security control, communication system and other fields. Suitable applications are DC buck/boost regulator, increasing system insulation level and voltage drop compensation along cable…etc.

Mean Well DC-DC Converter DDR-60 Series Model Encoding

Specification

MODEL		DDR-60G-5	DDR-60G-12	DDR-60G-15		DDR-60G-24	DDR-60L-5		DDR-60L-12	DDR-60L-15	DDR-60L-24
OUTPUT	DC VOLTAGE	5V	12V	15V		24V	5V		12V	15V	24V
	RATED CURRENT	10.8A	5A	4A		2.5A	12A		5A	4A	2.5A
	CURRENT RANGE	0 ~ 10.8A	0 ~ 5A	0 ~ 4A		0 ~ 2.5A	0 ~ 12A		0 ~ 5A	0 ~ 4A	0 ~ 2.5A
	RATED POWER	54W	60W	60W		60W	60W		60W	60W	60W
	RIPPLE & NOISE (max.) Note.2	60mVp-p	75mVp-p	75mVp-p		100mVp-p	60mVp-p		75mVp-p	75mVp-p	100mVp-p
	VOLTAGE ADJ. RANGE	4.5 ~ 5.5V	9 ~ 13.2V	13.5 ~ 16.5V		21.6 ~ 28V	4.5 ~ 5.5V		9 ~ 13.2V	13.5 ~ 16.5V	21.6 ~ 28V
	VOLTAGE TOLERANCE Note.3	±2.0%	±2.0%	±2.0%		±2.0%	±2.0%		±2.0%	±2.0%	±2.0%
	LINE REGULATION	±0.5%	±0.5%	±0.5%		±0.5%	±0.5%		±0.5%	±0.5%	±0.5%
	LOAD REGULATION	±1.5%	±0.5%	±0.5%		±0.5%	±1.5%		±0.5%	±0.5%	±0.5%
	SETUP, RISE TIME	120ms, 85ms at full load
	HOLD UP TIME (Typ.)	G-type: 5ms@24Vdc input					L-type: 10ms@48Vdc input
	EXTERNAL CAPACITANCE LOAD (Max.)	6800μF	4700μF	3300μF		2200μF	6800μF		4700μF	3300μF	2200μF
INPUT	VOLTAGE RANGE Note.4	9 ~ 36Vdc					18 ~ 75Vdc
	EFFICIENCY (Typ.)	87.5%	91%	91%		91%	87.5%		91%	92%	92%
	DC CURRENT (Typ.)	3A /24Vdc					1.5A /48Vdc
	INRUSH CURRENT (Typ.)	20A /24Vdc					20A /48Vdc
PROTECTION	OVERLOAD	105 ~ 135% rated output power
		Protection type: Constant current limiting, recovers automatically after fault condition is removed
	OVER VOLTAGE	5.75 ~ 7V	13.8 ~ 16.2V	17.25 ~ 20.25V		28.8 ~ 34V	5.75 ~ 7V		13.8 ~ 16.2V	17.25 ~ 20.25V	28.8 ~ 34V
		Protection type: Shut down o/p voltage, re-power on to recover
	REVERSE POLARITY	By internal MOSFET, no damage, recovers automatically after fault condition removed
	UNDER VOLTAGE LOCKOUT	24Vin (G-type): Power ON≥9V, OFF≤8.5V
		48Vin (L-type): Power ON≥18V, OFF≤17V
ENVIRONMENT	WORKING TEMP.	-40 ~ +85℃ (Refer to “Derating Curve”)
	WORKING HUMIDITY	5 ~ 95% RH non-condensing
	STORAGE TEMP., HUMIDITY	-40 ~ +85℃, 5 ~ 95% RH non-condensing
	TEMP. COEFFICIENT	±0.03%/℃ (0 ~60℃)
	VIBRATION	Component:10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes; Mounting: Compliance to IEC60068-2-6
	OPERATING ALTITUDE	5000 meters
SAFETY & EMC (Note 5)	SAFETY STANDARDS	IEC 62368-1, UL 62368-1, AS/NZS 62368-1, EAC TP TC 004 approved
	WITHSTAND VOLTAGE	I/P-O/P:4KVdc
	ISOLATION RESISTANCE	I/P-O/P>100M Ohms / 500Vdc / 25℃/ 70% RH
	EMC EMISSION	Parameter			Standard			Test Level / Note
		Conducted			BS EN/EN55032			Class A
		Radiated			BS EN/EN55032			Class A for 1m I/O cable, Class B for 30cm I/O cable
		Voltage Flicker			BS EN/EN61000-3-3			—–
	EMC IMMUNITY	BS EN/EN55035, BS EN/EN61000-6-2(BS EN/EN50082-2)
		Parameter			Standard			Test Level / Note
		ESD			BS EN/EN61000-4-2			Level 3, 8KV air; Level 3, 6KV contact; criteria A
		Radiated			BS EN/EN61000-4-3			Level 3, 10V/m; criteria A
		EFT / Burst			BS EN/EN61000-4-4			Level 3, 2KV; criteria A
		Surge			BS EN/EN61000-4-5			Level 3, 1KV/Line-Line; criteria A
		Conducted			BS EN/EN61000-4-6			Level 3, 10V; criteria A
		Magnetic Field			BS EN/EN61000-4-8			Level 4, 30A/m; criteria A
OTHERS	MTBF	3261.6K hrs min. Telcordia SR-332 (Bellcore); 611.1K hrs min. MIL-HDBK-217F (25℃)
	DIMENSION	52.59054.5mm (WHD)
	PACKING	216g; 60pcs/14Kg/0.97CUFT

Applications

Industrial control system
Semi-conductor fabrication equipment
Factory automation
Electro-mechanical
Wireless network
Telecom or datacom system

Mean Well DC-DC Converter DDR-60 Series Video Show

Find us on SNS

You can find us and know more about us on SNS:

DDR-60 series

DDR-30 series

DDR-120 series