MW Mean Well Meanwell 300W Ultra-High Peak Power Supply HRP-300N3 series

Features

Universal AC input / Full range
Withstand 300VAC surge input for 5 seconds
350% peak power capability
Built-in constant current limiting circuit
Protections: Short circuit / Overload / Over voltage / Over temperature

Built-in cooling fan ON-OFF control

Built-in DC OK signal
Built-in remote sense function
Withstand 5G vibration
Oprating altitude up to 5000 meters
Output votage adjustable ±15%(Avg.)
1U low profile 41mm
5 years warranty

Description

MEAN WELL HRP-300N3 series is a 300W single output AC/DC ultra-high peak power supply. This series operates at 85~264VAC input voltage and offers the models with the DC output mostly demanded from the industry. Each model is cooled by the built-in fan with fan ON-OFF control, working for the temperature up to 70℃.Moreover, MW HRP-300N3 can provide 350% short-duration peak power for motor applications and electromechanical loads requiring much higher power during start-up.

Mean Well Ultra-high Peak Power Supply HRP-300N3 Series Data Sheet Download

300W Ultra-high Peak Power Supply HRP-300N3 Series

Mean Well Ultra-high Peak Power Supply HRP-300N3 Series Model Encoding

Specification

MODEL		HRP-300N3-12	HRP-300N3-24		HRP-300N3-36		HRP-300N3-48
OUTPUT	DC VOLTAGE	12V	24V		36V		48V
	RATED CURRENT	27A	14A		9A		7A
	CURRENT RANGE	0 ~ 27A	0 ~ 14A		0 ~ 9A		0 ~ 7A
	RATED POWER	324W	336W		324W		336W
	RIPPLE & NOISE (max.) Note.2	120mVp-p	150mVp-p		250mVp-p		250mVp-p
	VOLTAGE ADJ. RANGE	10.2 ~ 13.8V	21.6 ~ 28.8V		28.8 ~ 39.6V		40.8 ~ 55.2V
	VOLTAGE TOLERANCE Note.3	±1.0%	±1.0%		±1.0%		±1.0%
	LINE REGULATION	±0.3%	±0.2%		±0.2%		±0.2%
	LOAD REGULATION	±0.5%	±0.5%		±0.5%		±0.5%
	SETUP, RISE TIME	1000ms, 50ms/230VAC 2500ms, 50ms/115VAC at full load
	HOLD UP TIME (Typ.)	16ms/230VAC 16ms/115VAC at full load
INPUT	VOLTAGE RANGE Note.4	85 ~ 264VAC 120 ~ 370VDC
	FREQUENCY RANGE	47 ~ 63Hz
	POWER FACTOR (Typ.)	PF>0.95/230VAC PF>0.99/115VAC at full load
	EFFICIENCY (Typ.)	88%	87%		88%		89%
	AC CURRENT (Typ.)	3.5A/115VAC 1.8A/230VAC
	INRUSH CURRENT (Typ.)	35A/115VAC 75A/230VAC
	LEAKAGE CURRENT	<2mA / 240VAC
PROTECTION	OVERLOAD	Output power >105% rated for more than 5 seconds then shut down o/p voltage, re-power on to recover
		Constant current limiting for output power >380%(1140W) rated for more than 5 seconds and then shut down o/p voltage, re-power on to recover
	OVER VOLTAGE	14.4 ~ 16.8V	30 ~ 34.8V		41.4 ~ 48.6V		57.6 ~ 67.2V
		Protection type: Shut down o/p voltage, re-power on to recover
	OVER TEMPERATURE	TSW1: Shut down o/p voltage, recovers automatically after temperature goes down RTH3: Shut down o/p voltage, re-power on to recover
FUNCTION	DC OK SIGNAL	PSU turns on: 3.3 ~ 5.6V; PSU turns off : 0 ~ 1V
	FAN CONTROL (Typ.)	Load 35±15% or RTH2≧50℃ Fan on
ENVIRONMENT	WORKING TEMP.	-40 ~ +70℃ (Refer to “Derating Curve”)
	WORKING HUMIDITY	20 ~ 90% RH non-condensing
	STORAGE TEMP., HUMIDITY	-40 ~ +85℃, 10 ~ 95% RH non-condensing
	TEMP. COEFFICIENT	±0.03%/ ℃ (0 ~ 50℃)
	VIBRATION	10 ~ 500Hz, 5G 10min./1cycle, 60min. each along X, Y, Z axes
	OPERATING ALTITUDE Note.5	5000 meters
SAFETY & EMC (Note 6)	SAFETY STANDARDS	UL62368-1, TUV BS EN/EN62368-1, EAC TP TC 004, AS/NZS 62368.1 approved
	WITHSTAND VOLTAGE	I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC
	ISOLATION RESISTANCE	I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH
	EMC EMISSION	Parameter		Standard		Test Level / Note
		Conducted		BS EN/EN55032		Class B
		Radiated		BS EN/EN55032		Class B
		Harmonic current		BS EN/EN61000-3-2		Class A
		Voltage Flicker		BS EN/EN61000-3-3		—–
	EMC IMMUNITY	BS EN/EN55035, BS EN/EN61000-6-2(BS EN/EN50082-2)
		Parameter		Standard		Test Level / Note
		ESD		BS EN/EN61000-4-2		Level 3, 8KV air; Level 2, 4KV contact
		RF field		BS EN/EN61000-4-3		Level 3, 10V/m
		EFT/ Burst		BS EN/EN61000-4-4		Level 3, 2KV
		Surge		BS EN/EN61000-4-5		Level 4, 4KV/Line-FG; 2KV/Line-Line
		Conducted		BS EN/EN61000-4-6		Level 3, 10V
		Magnetic Field		BS EN/EN61000-4-8		Level 4, 30A/m
		Voltage Dips and Interruptions		BS EN/EN61000-4-11		95% dip 0.5 periods, 30% dip 25 periods, 95% interruptions 250 periods
OTHERS	MTBF	1524.0K hrs min. Telcordia TR/SR-332 (Bellcore); 187.7K hrs min. MIL-HDBK-217F (25℃)
	DIMENSION	19910541mm (LWH)
	PACKING	0.9Kg; 15pcs/14.5Kg/0.84CUFT

Application

Industrial automation machinery
Industrial control system
Mechanical and electrical equipment
Diagnostic or biological facilities
Test or measurement systems
Telecommunication equipment

Mean Well Ultra-high Peak Power Supply HRP-300N3 Series Video Show

Find us on SNS

You can find us and know more about us on SNS: