MW Mean Well Meanwell 960W Single Output Industrial Switching Power Supply DIN Rail with PFC Function SDR-960 Series

Features

- AC input 180~264VAC only

130% peak load capability
110mm slim design
Built-in active PFC function compliance to BS EN/EN61000-3-2
High efficiency 94% and low power dissipation
Protections: Short circuit / Overload / Over voltage / Over temperature
Cooling by free air convection
Built-in constant current limiting circuit
Can be installed on DIN rail TS-35/7.5 or 15
UL508(industrial control equipment)approved
BS EN/EN61000-6-2(BS EN/EN50082-2) industrial immunity level
Current sharing up to 3840W(3+1)
Built-in DC OK relay contact
100% full load burn-in test
3 years warranty

Description

The 960W Single Output Industrial DIN RAIL Power Supply with PFC Function SDR-960 series is a high-performance and robust power supply designed specifically for industrial applications. It is built to be mounted on DIN rails, ensuring easy installation and integration into various industrial systems.

With a power rating of 960 watts, the SDR-960 series provides ample power to meet the demands of industrial equipment and devices. It operates on a wide input voltage range of 90-264VAC, making it suitable for use in different regions around the world. The power supply features a built-in active power factor correction (PFC) function, ensuring high efficiency and power factor correction.

Designed to withstand the rugged conditions of industrial environments, the SDR-960 series has a wide operating temperature range of -30 to +70 degrees Celsius. This allows it to operate reliably even in extreme temperatures. It is also equipped with various protection features, including overvoltage, overcurrent, and short-circuit protection, ensuring the safety and longevity of connected devices.

The SDR-960 series is compliant with international safety standards and holds certifications such as UL, CUL, TUV, CB, CE, and FCC. This ensures that the power supply meets the necessary safety and quality requirements for industrial applications.

With its compact and sturdy design, the SDR-960 series is suitable for space-limited installations and can withstand harsh environmental conditions. It is a reliable and efficient power supply solution for industrial applications that require a high power output and stable power delivery.

Overall, the 960W Single Output Industrial DIN RAIL Power Supply with PFC Function SDR-960 series is a dependable and powerful power supply option for industrial settings. Its high power output, PFC function, and robust protection features make it suitable for a wide range of industrial applications where reliable and efficient power supply is critical.

Mean Well Power Supply SDR-960 Series Data Sheet Download

960W Single Output Switching Power Supply SDR-960 Series

Specification

MODEL		SDR-960-24	SDR-960-48
OUTPUT	DC VOLTAGE	24V	48V
	RATED CURRENT	40A	20A
	CURRENT RANGE	0 ~ 40A	0 ~ 20A
	RATED POWER	960W	960W
	PEAK CURRENT	52A	26A
	PEAK POWER Note.6	1248W (3sec.)
	RIPPLE & NOISE (max.) Note.2	180mVp-p	250mVp-p
	VOLTAGE ADJ. RANGE	24 ~ 28V	48 ~ 55V
	VOLTAGE TOLERANCE Note.3	±1.0%	±1.0%
	LINE REGULATION	±0.5%	±0.5%
	LOAD REGULATION	±1.0%	±1.0%
	SETUP, RISE TIME	1000ms, 100ms/230VAC at full load
	HOLD UP TIME (Typ.)	14ms / 230VAC at full load
INPUT	VOLTAGE RANGE Note.7	180 ~ 264VAC 254 ~ 370VDC
	FREQUENCY RANGE	47 ~ 63Hz
	POWER FACTOR (Typ.)	PF≧0.95/230VAC at full load
	EFFICIENCY (Typ.)	94%	94%
	AC CURRENT (Typ.)	6A/230VAC
	INRUSH CURRENT (Typ.)	COLD START 50A / 230VAC
	LEAKAGE CURRENT	<3.5mA / 240VAC
PROTECTION	OVERLOAD	Normally works within 105 ~ 130% rated output power for more than 3 seconds and then shut down o/p voltage with auto-recovery after 30 seconds if the peak load condition is removed
		Constant current limiting within 130 ~ 150% rated output power for more than 3 seconds and then shut down o/p voltage, re-power on to recover
	OVER VOLTAGE	29 ~ 33V	56 ~ 65V
		Protection type : Shut down o/p voltage, with auto-recovery or re-power on to recover
	OVER TEMPERATURE	Shut down o/p voltage, recovers automatically after temperature goes down
FUNCTION	DC OK REALY CONTACT RATINGS (max.)	60Vdc/0.3A, 30Vdc/1A, 30Vac/0.5A resistive load
	CURRENT SHARING	Please refer to function manual
ENVIRONMENT	WORKING TEMP. Note.5	-30 ~ +70℃ (Refer to “Derating Curve”)
	WORKING HUMIDITY	20 ~ 95% RH non-condensing
	STORAGE TEMP., HUMIDITY	-40 ~ +85℃, 10 ~ 95% RH non-condensing
	TEMP. COEFFICIENT	±0.03%/℃ (0 ~ 50℃)
	VIBRATION	Component:10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes; Mounting: Compliance to IEC60068-2-6
SAFETY & EMC (Note 4)	SAFETY STANDARDS	UL508, TUV BS EN/EN62368-1, BSMI CNS14336-1, BIS IS13252(Part1) (only for 24V), AS/NZS62368.1, EAC TP TC 004 approved; (meet BS EN/EN60204-1)
	WITHSTAND VOLTAGE	I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC O/P-DC OK:0.5KVAC
	ISOLATION RESISTANCE	I/P-O/P, I/P-FG, O/P-FG:>100M Ohms / 500VDC / 25℃/ 70% RH
	EMC EMISSION Note.8	Compliance to BS EN/EN55032 (CISPR32), BS EN/EN61204-3 Conduction class B, Radiation class A, BS EN/EN61000-3-2,-3, EAC TP TC 020, BSMI CNS13438
	EMC IMMUNITY	Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11, BS EN/EN55035, BS EN/EN61000-6-2 (BS EN/EN50082-2), BS EN/EN61204-3, heavy industry level, EAC TP TC 020
OTHERS	MTBF	660.2K hrs min. Telcordia SR-332 (Bellcore); 70.7K hrs min. MIL-HDBK-217F (25℃)
	DIMENSION	110125.2150mm (WHD)
	PACKING	2.47Kg; 6pcs/15.8Kg/1.55CUFT

Mean Well Power Supply SDR-960 Series Video Show

Find us on SNS

You can find us and know more about us on SNS: