SDR-480 series
September 22, 2023
TDR-240 series
September 26, 2023MW Mean Well Meanwell 960W Single Output Industrial Switching Power Supply DIN Rail with PFC Function SDR-960 Series
Features
-
- AC input 180~264VAC only
- 130% peak load capability
- 110mm slim design
- Built-in active PFC function compliance to BS EN/EN61000-3-2
- High efficiency 94% and low power dissipation
- Protections: Short circuit / Overload / Over voltage / Over temperature
- Cooling by free air convection
- Built-in constant current limiting circuit
- Can be installed on DIN rail TS-35/7.5 or 15
- UL508(industrial control equipment)approved
- BS EN/EN61000-6-2(BS EN/EN50082-2) industrial immunity level
- Current sharing up to 3840W(3+1)
- Built-in DC OK relay contact
- 100% full load burn-in test
- 3 years warranty
Description
The 960W Single Output Industrial DIN RAIL Power Supply with PFC Function SDR-960 series is a high-performance and robust power supply designed specifically for industrial applications. It is built to be mounted on DIN rails, ensuring easy installation and integration into various industrial systems.
With a power rating of 960 watts, the SDR-960 series provides ample power to meet the demands of industrial equipment and devices. It operates on a wide input voltage range of 90-264VAC, making it suitable for use in different regions around the world. The power supply features a built-in active power factor correction (PFC) function, ensuring high efficiency and power factor correction.
Designed to withstand the rugged conditions of industrial environments, the SDR-960 series has a wide operating temperature range of -30 to +70 degrees Celsius. This allows it to operate reliably even in extreme temperatures. It is also equipped with various protection features, including overvoltage, overcurrent, and short-circuit protection, ensuring the safety and longevity of connected devices.
The SDR-960 series is compliant with international safety standards and holds certifications such as UL, CUL, TUV, CB, CE, and FCC. This ensures that the power supply meets the necessary safety and quality requirements for industrial applications.
With its compact and sturdy design, the SDR-960 series is suitable for space-limited installations and can withstand harsh environmental conditions. It is a reliable and efficient power supply solution for industrial applications that require a high power output and stable power delivery.
Overall, the 960W Single Output Industrial DIN RAIL Power Supply with PFC Function SDR-960 series is a dependable and powerful power supply option for industrial settings. Its high power output, PFC function, and robust protection features make it suitable for a wide range of industrial applications where reliable and efficient power supply is critical.
Mean Well Power Supply SDR-960 Series Data Sheet Download
Specification
| MODEL | SDR-960-24 | SDR-960-48 | |
|
OUTPUT |
DC VOLTAGE | 24V | 48V |
| RATED CURRENT | 40A | 20A | |
| CURRENT RANGE | 0 ~ 40A | 0 ~ 20A | |
| RATED POWER | 960W | 960W | |
| PEAK CURRENT | 52A | 26A | |
| PEAK POWER Note.6 | 1248W (3sec.) | ||
| RIPPLE & NOISE (max.) Note.2 | 180mVp-p | 250mVp-p | |
| VOLTAGE ADJ. RANGE | 24 ~ 28V | 48 ~ 55V | |
| VOLTAGE TOLERANCE Note.3 | ±1.0% | ±1.0% | |
| LINE REGULATION | ±0.5% | ±0.5% | |
| LOAD REGULATION | ±1.0% | ±1.0% | |
| SETUP, RISE TIME | 1000ms, 100ms/230VAC at full load | ||
| HOLD UP TIME (Typ.) | 14ms / 230VAC at full load | ||
|
INPUT |
VOLTAGE RANGE Note.7 | 180 ~ 264VAC 254 ~ 370VDC | |
| FREQUENCY RANGE | 47 ~ 63Hz | ||
| POWER FACTOR (Typ.) | PF≧0.95/230VAC at full load | ||
| EFFICIENCY (Typ.) | 94% | 94% | |
| AC CURRENT (Typ.) | 6A/230VAC | ||
| INRUSH CURRENT (Typ.) | COLD START 50A / 230VAC | ||
| LEAKAGE CURRENT | <3.5mA / 240VAC | ||
|
PROTECTION |
OVERLOAD |
Normally works within 105 ~ 130% rated output power for more than 3 seconds and then shut down o/p voltage with auto-recovery
after 30 seconds if the peak load condition is removed |
|
| Constant current limiting within 130 ~ 150% rated output power for more than 3 seconds and then shut down o/p voltage, re-power
on to recover |
|||
|
OVER VOLTAGE |
29 ~ 33V | 56 ~ 65V | |
| Protection type : Shut down o/p voltage, with auto-recovery or re-power on to recover | |||
| OVER TEMPERATURE | Shut down o/p voltage, recovers automatically after temperature goes down | ||
|
FUNCTION |
DC OK REALY CONTACT RATINGS (max.) | 60Vdc/0.3A, 30Vdc/1A, 30Vac/0.5A resistive load | |
| CURRENT SHARING | Please refer to function manual | ||
|
ENVIRONMENT |
WORKING TEMP. Note.5 | -30 ~ +70℃ (Refer to “Derating Curve”) | |
| WORKING HUMIDITY | 20 ~ 95% RH non-condensing | ||
| STORAGE TEMP., HUMIDITY | -40 ~ +85℃, 10 ~ 95% RH non-condensing | ||
| TEMP. COEFFICIENT | ±0.03%/℃ (0 ~ 50℃) | ||
| VIBRATION | Component:10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes; Mounting: Compliance to IEC60068-2-6 | ||
|
SAFETY & EMC (Note 4) |
SAFETY STANDARDS | UL508, TUV BS EN/EN62368-1, BSMI CNS14336-1, BIS IS13252(Part1) (only for 24V), AS/NZS62368.1, EAC TP TC 004 approved; (meet BS EN/EN60204-1) | |
| WITHSTAND VOLTAGE | I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC O/P-DC OK:0.5KVAC | ||
| ISOLATION RESISTANCE | I/P-O/P, I/P-FG, O/P-FG:>100M Ohms / 500VDC / 25℃/ 70% RH | ||
|
EMC EMISSION Note.8 |
Compliance to BS EN/EN55032 (CISPR32), BS EN/EN61204-3 Conduction class B, Radiation class A, BS EN/EN61000-3-2,-3,
EAC TP TC 020, BSMI CNS13438 |
||
| EMC IMMUNITY | Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11, BS EN/EN55035, BS EN/EN61000-6-2 (BS EN/EN50082-2), BS EN/EN61204-3,
heavy industry level, EAC TP TC 020 |
||
|
OTHERS |
MTBF | 660.2K hrs min. Telcordia SR-332 (Bellcore); 70.7K hrs min. MIL-HDBK-217F (25℃) | |
| DIMENSION | 110*125.2*150mm (W*H*D) | ||
| PACKING | 2.47Kg; 6pcs/15.8Kg/1.55CUFT | ||
