MW Mean Well Meanwell 1600W Single Output with PFC Fucntion Switching Power Supply RSP-1600 series

Features

Universal AC input / Full range (Withstand 300VAC surge input for 5 seconds)
Built-in active PFC function
High efficiency up to 93%
Forced air cooling by built-in DC fan
Output voltage and constant current level programmable
Active current sharing up to 9600W
Built-in remote ON-OFF control / remote sense / auxiliary power / DC OK signal
Protections: Short circuit / Overload / Over voltage / Over temperature
Optional PMBus or CANBus protocol
5 years warranty

Mean Well Enclosed Switching Power Supply RSP-1600 Series Data Sheet Download

1600W Single Output with PFC Function Enclosed Switching Power Supply RSP-1600 Series

Description

Mean Well RSP-1600 is a 1.6KW single output enclosed type AC/DC power supply with a 1U low profile and a high power density up to 25W/inch3. This series operates for 90~264VAC input voltage and offers the models with the DC output mostly demanded from the industry. Each model is cooled by the thermostatically controlled fan. Moreover, RSP-1600 provides vast design flexibility by equipping various built-in functions such as the output programming, active current sharing, remote ON-OFF control, auxiliary power, etc.

Mean Well Enclosed Switching Power Supply RSP-1600 Series Model Encoding

Type	Communication Protocol	Note
Blank	None	In Stock
PM	PMBus protocol	By request
CAN	CANBus protocol	By request

Specification

MODEL		RSP-1600-12	RSP-1600-24		RSP-1600-27	RSP-1600-36		RSP-1600-48
OUTPUT	DC VOLTAGE	12V	24V		27V	36V		48V
	RATED CURRENT	125A	67A		59A	44.5A		33.5A
	CURRENT RANGE	0 ~ 125A	0 ~ 67A		0 ~ 59A	0 ~ 44.5A		0 ~ 33.5A
	RATED POWER	1500W	1608W		1593W	1602W		1608W
	RIPPLE & NOISE (max.) Note.2	150mVp-p	200mVp-p		200mVp-p	250mVp-p		300mVp-p
	VOLTAGE ADJ. RANGE	11.5 ~ 15V	23.5 ~ 30V		26.5 ~ 33.5V	35.5 ~ 45V		47.5 ~ 58.8V
	VOLTAGE TOLERANCE Note.4	±1.0%	±1.0%		±1.0%	±1.0%		±1.0%
	LINE REGULATION	±0.5%	±0.5%		±0.5%	±0.5%		±0.5%
	LOAD REGULATION	±0.5%	±0.5%		±0.5%	±0.5%		±0.5%
	SETUP, RISE TIME	1500ms, 60ms/230VAC at full load
	HOLD UP TIME (Typ.)	16ms / 230VAC at 75% load 10ms / 230VAC at full load
INPUT	VOLTAGE RANGE Note.5	90 ~ 264VAC 250 ~ 370VDC
	FREQUENCY RANGE	47 ~ 63Hz
	POWER FACTOR (Typ.)	0.97/230VAC at full load
	EFFICIENCY (Typ.)	89%	91.5%		92%	92%		93%
	AC CURRENT (Typ.) Note.5	14A/115VAC 8A/230VAC	15A/115VAC 8.5A/230VAC
	INRUSH CURRENT (Typ.)	COLD START 35A/230VAC
	LEAKAGE CURRENT	<2mA / 230VAC
PROTECTION	OVERLOAD	105 ~ 115% rated current
		Protection type: Constant current limiting, shut down O/P voltage after 5 sec. After O/P voltage falls, re-power on to recover
	OVER VOLTAGE	15.75 ~ 18.75V	31.5 ~ 37.5V		35.2 ~ 41.9V	47.2 ~ 56.3V		63 ~ 75V
		Protection type: Shut down o/p voltage, re-power on to recover
	OVER TEMPERATURE	Protection type: Shut down o/p voltage, recovers automatically after temperature goes down
FUNCTION	OUTPUT VOLTAGE PROGRAMMABLE(PV) Note 6	Adjustment of output voltage is allowable to 40 ~ 125% of nominal output voltage (60 ~ 125% for 12V). Please refer to the Function Manual.
	OUTPUT CURRENT PROGRAMMABLE(PC) Note 6	Adjustment of constant current level is allowable to 20 ~ 100% of rated current. Please refer to the Function Manual.
	AUXILIARY POWER	5V @ 0.3A, 12V @ 0.8A
	REMOTE ON-OFF CONTROL	By electrical signal or dry contact Power ON:short Power OFF:open. Please refer to the Function Manual
	REMOTE SENSE	Compensate voltage drop on the load wiring up to 0.5V. Please refer to the Function Manual
	ALARM SIGNAL	Isolated signal output for T-alarm and DC OK
ENVIRONMENT	WORKING TEMP.	-30 ~ +70℃ (Refer to “Derating Curve”)
	WORKING HUMIDITY	20 ~ 90% RH non-condensing
	STORAGE TEMP., HUMIDITY	-40 ~ +85℃, 10 ~ 95% RH non-condensing
	TEMP. COEFFICIENT	±0.03%/℃ (0 ~ 50℃)
	VIBRATION	10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
SAFETY & EMC (Note 8)	SAFETY STANDARDS	UL62368-1, CAN/CSA C22.2 No. 62368-1, TUV BS EN/EN62368-1, BSMI CNS14336-1, AS/NZS62368.1, EAC TP TC 004 approved
	WITHSTAND VOLTAGE	I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:1.5KVAC
	ISOLATION RESISTANCE	I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH
	EMC EMISSION	Parameter		Standard			Test Level / Note
		Conducted		BS EN/EN55032 (CISPR32)			Class B
		Radiated		BS EN/EN55032 (CISPR32)			Class A
		Harmonic Current		BS EN/EN61000-3-2			Class A
		Voltage Flicker		BS EN/EN61000-3-3			—–
	EMC IMMUNITY	BS EN/EN55035, BS EN/EN61000-6-2, BSMI CNS13438
		Parameter		Standard			Test Level / Note
		ESD		BS EN/EN61000-4-2			Level 3, 8KV air ; Level 2, 4KV contact
		Radiated		BS EN/EN61000-4-3			Level 3
		EFT / Burst		BS EN/EN61000-4-4			Level 3
		Surge		BS EN/EN61000-4-5			Level 4, 2KV/Line-Line 4KV/Line-Earth
		Conducted		BS EN/EN61000-4-6			Level 3
		Magnetic Field		BS EN/EN61000-4-8			Level 4
		Voltage Dips and Interruptions		BS EN/EN61000-4-11			>95% dip 0.5 periods, 30% dip 25 periods, >95% interruptions 250 periods
OTHERS	MTBF	478.8K hrs min. Telcordia SR-332 (Bellcore); 42.1K hrs min. MIL-HDBK-217F (25℃)
	DIMENSION	3008541mm (LWH)
	PACKING	2.1Kg; 6pcs/13.6Kg/1.25CUFT

Application

Factory control or automation apparatus
Test and measurement instrument
Laser related machine
Aging facility
Digital broadcasting
Constant current source
Redundant system

Mean Well Enclosed Switching Power Supply RSP-1600 Series Video Show

Find us on SNS

You can find us and know more about us on SNS: