MW Mean Well Meanwell 200W Constant Voltage + Constant Current LED Driver NPF-200 series

Features

Plastic housing with Class II and PFC design
Constant Voltage + Constant Current mode output
No load power consumption <0.5W
IP67 rating for indoor or outdoor installations
Dimming function: 3 in 1 Dimming(C.V Dim. only) to adjust output voltage level
Flicker free Design
Typical lifetime>50000 hours
5 years warranty

Mean Well LED Driver NPF-200 Series Data Sheet Download

200W Constant Voltage + Constant Current LED Driver NPF-200 series

Description

NPF-200 series is a 200W AC/DC LED driver featuring the constant current or constant voltage mode output. NPF-200 operates from 100~305VAC and offers models with different rated voltage ranging between 12V and 54V. The models are 12V(NPF-200-12 and NPF-200V-12), 24V(NPF-200-24 and NPF-200V-24), 36V(NPF-200-36 and NPF-200V-36), 42V(NPF-200-42 and NPF-200V-42), 48V(NPF-200-48 and NPF-200V-48), 54V(NPF-200-54 and NPF-200V-54). Thanks to the high efficiency up to 94% with the fanless design, the entire series is able to operate for -40℃~+85℃ case temperature under free air convection. The entire series is rated with IP67 ingress protection level and is suitable to work for a variety of applications at dry, damp or wet locations. NPF-200 is particular design without flicker Dimming Function which is suitable for LED strip or Poultry lighting applications.

In NPF family, there are NPF-40D series, NPF-40 series, NPF-60D series, NPF-60 series, NPF-90D series, NPF-90 series, NPF-120D series, NPF-120 series and NPF-200 series.

Mean Well LED Driver NPF-200 Series Model Encoding

Type	IP Level	Function	Note
Blank	IP67	Constant Voltage + Constant current mode output	In Stock
V	IP67	3 in 1 dimming function to adjust output voltage (C.V Dimming)	In Stock

Specification

MODEL		NPF-200 -12	NPF-200 -24	NPF-200 -36	NPF-200 -42	NPF-200 -48	NPF-200 -54
OUTPUT	DC Voltage	12V	24V	36V	42V	48V	54V
	CONSTANT CURRENT AND OUTPUT VOLTAGE REGION	6 ~ 12V	12~24V	18 ~ 36V	21 ~ 42V	24 ~ 48V	27 ~ 54V
	RATED CURRENT	15A	8.3A	5.55A	4.75A	4.17A	3.71A
	RATED POWER	180W	199.2W	199.8W	199.5W	200.1W	200.3W
	RIPPLE & NOISE (max.) Note.9	150mVp-p	150mVp-p	200mVp-p	250mVp-p	250mVp-p	350mVp-p
	VOLTAGE TOLERANCE Note.10	±4.0%	±4.0%	±2.0%	±2.0%	±2.0%	±2.0%
	LINE REGULATION	±0.5%	±0.5%	±0.5%	±0.5%	±0.5%	±0.5%
	LOAD REGULATION	±2.0%	±0.5%	±0.5%	±0.5%	±0.5%	±0.5%
	CURRENT TOLERANCE	±5.0%
	SET UP TIME _Note.3	500ms/230VAC or 115VAC
	RISE TIME	80ms for Blank type, 200ms for V-type
	HOLD UP TIME (Typ.)	10ms/230VAC or 115VAC
INPUT	VOLTAGE RANGE _Note.2	100 ~ 305VAC 142 ~ 431VDC (Please refer to “STATIC CHARACTERISTIC” section)
	FREQUENCY RANGE	47 ~ 63Hz
	POWER FACTOR (Typ.)	PF≧0.97/115VAC, PF≧0.96/230VAC, PF≧0.94/277VAC@full load (Please refer to “POWER FACTOR (PF) CHARACTERISTIC” section)
	TOTAL HARMONIC DISTORTION	THD< 20% (@load≧60%/115VC, 230VAC; @load≧75%/277VAC) (Please refer to “TOTAL HARMONIC DISTORTION(THD)” section)
	EFFICIENCY(Typ.)	92%	93%	94%	94%	94%	94%
	AC CURRENT (Typ.)	2.2A / 115VAC 1.1A / 230VAC 0.9A / 277VAC
	INRUSH CURRENT(Typ.)	COLD START 65A (twidth=550 μs measured at 50% Ipeak) at 230VAC; Per NEMA 410
	MAX. NO. of PSUs on 16A CIRCUIT BREAKER	3 units (circuit breaker of type B) / 5 units (circuit breaker of type C) at 230VAC
	LEAKAGE CURRENT	<0.25mA / 277VAC
	STANDBY POWER CONSUMPTION	<0.5W for V-type only (Output voltage dim to off)
PROTECTION	OVER CURRENT	95 ~ 108%
	OVER CURRENT	Hiccup mode or Constant current limiting, recovers automatically after fault condition is removed
	SHORT CIRCUIT	Hiccup mode or Constant current limiting, recovers automatically after fault condition is removed
	OVER VOLTAGE	13 ~ 18V	27 ~ 34V	41 ~ 49V	46 ~ 57V	53 ~ 65V	59 ~ 70V
	OVER VOLTAGE	Shut down o/p voltage, re-power on to recover
	OVER TEMPERATURE	Shut down o/p voltage, re-power on to recover
ENVIRONMENT	WORKING TEMP.	Tcase=-40 ~ +85℃ (Please refer to “OUTPUT LOAD vs TEMPERATURE” section)
	MAX. CASE TEMP.	Tcase=+85℃
	WORKING HUMIDITY	20 ~ 95% RH non-condensing
	STORAGE TEMP., HUMIDITY	-40 ~ +80℃, 10 ~ 95% RH
	TEMP. COEFFICIENT	±0.03%/℃ (0 ~ 40℃)
	VIBRATION	10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes
SAFETY & EMC	SAFETY STANDARDS	UL8750(type”HL”), CSA C22.2 No. 250.13-12, According to BS EN/EN61347-2-13 appendix J suitable for emergency installations. ENEC BS EN/EN61347-1, BS EN/EN61347-2-13, BS EN/EN62384 independent, EAC TP TC 004, GB19510.1, GB19510.14, IP67 approved; Design refers to BS EN/EN60335-1
	WITHSTAND VOLTAGE	I/P-O/P:3.75KVAC
	ISOLATION RESISTANCE	I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH
	EMC EMISSION	Compliance to BS EN/EN55015, BS EN/EN61000-3-2 Class C (@ load≧60%); BS EN/EN61000-3-3; GB17743 and GB17625.1, EAC TP TC 020
	EMC IMMUNITY	Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11; BS EN/EN61547, light industry level (surge immunity Line-Line 2KV); EAC TP TC 020
OTHERS	MTBF	2625.4K hrs min. Telcordia SR-332 (Bellcore); 247.5K hrs min. MIL-HDBK-217F (25℃)
	DIMENSION	1956839.5mm (LWH)
	PACKING	1.03Kg; 12pcs/ 13.4Kg/ 0.71CUFT

Applications

LED panel lighting
LED downlight
LED decorative lighting
Industrial lighting
Sign board and back light
LED strip lighting(C.V Dimming)
Agricultural lighting(C.V Dimming)
Poultry lighting (C.V Dimming)
Type “HL” for use in Class I, Division 2 hazardous (Classified) location

Mean Well LED Driver NPF-200 Series Video Show

Find us on SNS

You can find us and know more about us on SNS: