MW Mean Well Meanwell 480W Single Output Industrial Switching Power Supply DIN Rail with PFC and Parallel Function SDR-480P Series

Features

Current sharing up to 3840W(7+1)
High efficiency 94% and low power dissipation
150% peak load capability
Built-in active PFC function, PF>0.94
Protections: Short circuit / Overload / Over voltage / Over temperature
Cooling by free air convection
Built-in constant current limiting circuit
Can be installed on DIN rail TS-35/7.5 or 15
UL 508(industrial control equipment)approved
BS EN/EN61000-6-2(BS EN/EN50082-2) industrial immunity level
Built-in DC OK relay contact
100% full load burn-in test
3 years warranty

Description

The 480W Mean Well DIN Rail Power Supply with PFC and Parallel Function SDR-480P series is a high-performance and versatile power supply designed for industrial applications. It is specifically designed to be mounted on DIN rails, providing easy installation and integration into various systems.

The SDR-480P series offers a single output with a power rating of 480 watts. It operates on a wide input voltage range of 90-264VAC, making it suitable for use in different regions around the world. The power supply features a built-in active power factor correction (PFC) function, ensuring high power factor correction and efficiency.

One of the notable features of the SDR-480P series is its parallel function. This allows multiple power supplies to be connected in parallel to achieve higher power output or redundancy. This feature enhances system reliability and flexibility, making it suitable for critical applications.

The power supply is equipped with various protection features, including overvoltage, overcurrent, and short-circuit protection, ensuring the safety and longevity of connected devices. It also has a wide operating temperature range of -25 to +70 degrees Celsius, making it suitable for operation in harsh environments.

The SDR-480P series is compliant with international safety standards and holds certifications such as UL, CUL, TUV, CB, CE, and FCC. This ensures that the power supply meets the necessary safety and quality requirements.

Overall, the 480W Mean Well DIN Rail Power Supply with PFC and Parallel Function SDR-480P series is a reliable and efficient power supply solution for industrial applications. Its high power output, parallel function, and robust protection features make it suitable for demanding environments where reliable and stable power delivery is essential.

Mean Well Power Supply SDR-480P Series Data Sheet Download

480W Single Output Switching Power Supply SDR-480P Series

Specification

MODEL		SDR-480P-24	SDR-480P-48
OUTPUT	DC VOLTAGE	24V	48V
	RATED CURRENT	20A	10A
	CURRENT RANGE	0 ~ 20A	0 ~ 10A
	RATED POWER	480W	480W
	PEAK CURRENT	30A	15A
	PEAK POWER Note.6	720W (3sec.)
	RIPPLE & NOISE (max.) Note.2	100mVp-p	120mVp-p
	VOLTAGE ADJ. RANGE	24 ~ 28V	48 ~ 55V
	VOLTAGE TOLERANCE Note.3	±1.2%	±1.0%
	LINE REGULATION	±0.5%	±0.5%
	LOAD REGULATION	±1.0%	±1.0%
	SETUP, RISE TIME	1500ms, 150ms/230VAC 3000ms, 150ms/115VAC at full load
	HOLD UP TIME (Typ.)	14ms/230VAC at full load
INPUT	VOLTAGE RANGE Note.7	90 ~ 264VAC 127 ~ 370VDC
	FREQUENCY RANGE	47 ~ 63Hz
	POWER FACTOR (Typ.)	0.94/230VAC 0.99/115VAC at full load
	EFFICIENCY (Typ.)	94%
	AC CURRENT (Typ.)	5A/115VAC 2.5A/230VAC
	INRUSH CURRENT (Typ.)	40A/115VAC 80A/230VAC
	LEAKAGE CURRENT	<0.6mA / 240VAC
PROTECTION	OVERLOAD	Normally works within 110 ~ 150% rated output power for more than 3 seconds and then shut down o/p voltage with auto-recovery
		>150% rated power, constant current limiting with auto-recovery within 2 seconds and may cause to shut down if over 2 seconds
	OVER VOLTAGE	29 ~ 33V	56 ~ 65V
		Protection type: Shut down o/p voltage with auto-recovery or re-power on to recovery
	OVER TEMPERATURE	105℃±5℃ (TSW: detect on heatsink of power switch)
		Protection type: Shut down o/p voltage, recovers automatically after temperature goes down
FUNCTION	DC OK REALY CONTACT RATINGS (max.)	60Vdc/0.3A, 30Vdc/1A, 30Vac/0.5A resistive load
	CURRENT SHARING	Please see the Function Manual
ENVIRONMENT	WORKING TEMP. Note.5	-25 ~ +70℃ (Refer to “Derating Curve”)
	WORKING HUMIDITY	20 ~ 95% RH non-condensing
	STORAGE TEMP., HUMIDITY	-40 ~ +85℃, 10 ~ 95% RH
	TEMP. COEFFICIENT	±0.03%/℃ (0 ~ 50℃)
	VIBRATION	Component:10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes; Mounting: Compliance to IEC60068-2-6
SAFETY & EMC (Note 4)	SAFETY STANDARDS	UL508, TUV BS EN/EN62368-1, AS/NZS 62368.1, EAC TP TC 004, BSMI CNS14336-1 approved
	WITHSTAND VOLTAGE	I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC O/P-DC OK:0.5KVAC
	ISOLATION RESISTANCE	I/P-O/P, I/P-FG, O/P-FG:>100M Ohms / 500VDC / 25℃/ 70% RH
	EMC EMISSION	Compliance to BS EN/EN55032 (CISPR32) Class B, BS EN/EN61000-3-2, -3, EAC TP TC 020, CNS13438
	EMC IMMUNITY	Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11, BS EN/EN55035, BS EN/EN61000-6-2 (BS EN/EN50082-2), BS EN/EN61204-3, heavy industry level, EAC TP TC 020, SEMI F47 approved
OTHERS	MTBF	969.8K hrs min. Telcordia SR-332 (Bellcore); 118.6K hrs min. MIL-HDBK-217F (25℃)
	DIMENSION	85.5125.2128.5mm (WHD)
	PACKING	1.6Kg; 8pcs/13.8Kg/0.9CUFT

Mean Well Power Supply SDR-480P Series Unboxing

What you see in this video is what you get for the model SDR-480P-24.

Mean Well Power Supply SDR-480P Series Video Show

[icon type=”icon-lamp”The model in this video is SDR-480P-24 from Mean Well enclosed power supply SDR-480P series.

Find us on SNS

You can find us and know more about us on SNS: