1000W Constant Current Mode LED Driver HVGC-1000 series

Features

Wide input range 180 ~ 528VAC
Constant power mode output
Metal housing with ClassⅠdesign
Surge protection with 8KV/4KV
Built-in active PFC function
IP67 design for indoor or outdoor installation
3 in 1 dimming (dim to off and lsolation);
Smart timer dimming and DALI-2
Support with auxiliary DC output 12V/500mA
Typical lifetime>50000 hours
5 years warranty

Data Sheet Download

1000W Constant Current Mode LED Driver HVGC-1000 Series

Description

HVGC-1000 series is a 1000W LED AC/DC driver featuring the constant power mode with wide output voltage range. HVGC-1000 operates from 180~528VAC and offers models with different rated current ranging between 1320mA and 7000mA. Thanks to the high efficiency up to 96%, with the fanless design, all models are able to operate for -40℃~+90℃ case temperature under free air convection. The design of metal housing and IP67 ingress protection level allows this series to fit both indoor and outdoor applications, such as horticulture lighting and stadium light HVGC-1000 is equipped with various function options, such as dimming methodologies, so as to provide the optimal design flexibility for LED lighting system.

Model Encoding

Type	IP Level	Function	Note
AB	IP67	Standard constant power output with 3 in 1 dimming function (0~10Vdc, 10V PWM signal and resistance) and built-in potentiometer.	In Stock
D2	IP67	Built-in Smart timer dimming and programmable function.	By request
Dx	IP67	Built-in Smart timer dimming function by user request.	By request
DA	IP67	DALI control technology with Io Adjustable via built-in potentiometer.	By request

Specification

MODEL			HVGC-1000A-L-	HVGC-1000A-M-	HVGC-1000A-H-
OUTPUT	RATED CURRENT		2800mA	4200mA	5600mA
	RATED POWER		1003.2W	1008W	1008W
	CONSTANT CURRENT REGION Note.2		150 ~ 380V	95 ~ 240V	70 ~ 180V
	FULL POWER CURRENT RANGE		2640~3280mA	4200~5250mA	5600~7000mA
	OPEN CIRCUIT VOLTAGE (max.)		400V	250V	190V
	CURRENT ADJ. RANGE		1320~3280mA	2100~5250mA	2800~7000mA
	CURRENT RIPPLE		3.0% max. @ rated current
	CURRENT TOLERANCE		±5%
	AUXILIARY POWER		Nominal 12V (Tolerance: ±10%, R&N:150mVp-p) @500mA for HVGC-1000A only
	SET UP TIME	Note.4	500ms/230VAC, 347VAC, 480VAC
INPUT	VOLTAGE RANGE	Note.3	180 ~ 528VAC (Please refer to “STATIC CHARACTERISTIC” section)
	FREQUENCY RANGE		47 ~ 63Hz
	POWER FACTOR (Typ.)		PF≧0.98 / 230VAC, PF≧0.98 / 277VAC, PF≧0.97 / 347VAC, PF≧0.96 / 400VAC, PF≧0.95 / 480VAC at full load (Please refer to “Power Factor Characteristic” section)
	TOTAL HARMONIC DISTORTION		THD< 10% @ 347VAC> 80% loading (Please refer to “TOTAL HARMONIC DISTORTION (THD)” section)
	EFFICIENCY (Typ.)		95.5%	96%	96%
	AC CURRENT (Typ.)		3.15A / 347VAC 2.28A / 480VAC
	INRUSH CURRENT(Typ.)		COLD START 40A (twidth=1850μs measured at 50% Ipeak) at 480VAC; Per NEMA 410
	MAX. NO. of PSUs on CIRCUIT BREAKER		4 Unit for 30A type B circuit breaker / 8 unit for 30A type C circuit breaker at 480VAC
	LEAKAGE CURRENT		<0.75mA / 480VAC
	STANDBY POWER CONSUMPTION		Standby power consumption <2W for AB-Type(Dimming OFF)
PROTECTION	SHORT CIRCUIT		Constant current limiting, recovers automatically after fault condition is removed
	OVER VOLTAGE		400 ~ 425V	250 ~ 270V	190 ~ 205V
			Shut down output voltage, re-power on to recovery
	OVER TEMPERATURE		Shut down output voltage, re-power on to recovery
ENVIRONMENT	WORKING TEMP.		Tcase=-40 ~ +90℃ (Please refer to “OUTPUT LOAD vs TEMPERATURE” section)
	MAX. CASE TEMP.		Tcase=+90℃
	WORKING HUMIDITY		20 ~ 95% RH non-condensing
	STORAGE TEMP., HUMIDITY		-40 ~ +80℃, 10 ~ 95% RH non-condensing
	TEMP. COEFFICIENT		±0.03%/℃ (0 ~ 50℃)
	VIBRATION		10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes
SAFETY & EMC	SAFETY STANDARDS		UL8750(type”HL”), CAN/CSA C22.2 NO. 250. 13-17, ENEC BS EN/EN61347-1, BS EN/EN61347-2-13 independent, BS EN/EN62384; CCC GB19510.1, GB19510.14; EAC TP TC 004, IP67 approved
	DALI STANDARDS		Compare to IEC62386-101.102.207 for DA-Type only (Device type 6, DT6)
	WITHSTAND VOLTAGE		I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:1.5KVAC
	ISOLATION RESISTANCE		I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH
	EMC EMISSION		FCC Part 15 class B, EAC TP TC 020
			Parameter	Standard		Test Level/Note
			Conducted	BS EN/EN55015(CISPR15)/GB/T17743		—–
			Radiated	BS EN/EN55015(CISPR15)/GB/T17743		—–
			Harmonic Current	BS EN/EN61000-3-2/GB/T17625.1		Class C @load≥50%
			Voltage Flicker	BS EN/EN61000-3-3		—–
	EMC IMMUNITY		BS EN/EN61547, CCC GB/T17743 and GB17625
			Parameter	Standard		Test Level/Note
			ESD	BS EN/EN61000-4-2		Level 3, 8KV air ; Level 2, 4KV contact
			Radiated	BS EN/EN61000-4-3		Level 2
			EFT/Burst	BS EN/EN61000-4-4		Level 3
			Surge	BS EN/EN61000-4-5		4KV/Line-Line 8KV/Line-Earth
			Conducted	BS EN/EN61000-4-6		Level 2
			Magnetic Field	BS EN/EN61000-4-8		Level 4
			Voltage Dips and Interruptions	BS EN/EN61000-4-11		>95% dip 0.5 periods, 30% dip 25 periods, >95% interruptions 250 periods
OTHERS	MTBF		682.8K hrs min. Telcordia SR-332(Bellcore); 68.4K hrs min. MIL-HDBK-217F (25℃)
	DIMENSION		31014448.5mm (LWH)
	PACKING		4.2Kg; 4pcs/17.8Kg/1.16CUFT

Application

Harbor lighting
High-bay lighting
Flood lighting
Fishing lamp
Horticulture lighting
Stadium lighting
Type HL for use in ClassⅠ, Division 2
hazardous (Classified) location.

Video Show

Find us on SNS

You can find us and know more about us on SNS: