APV-8 series
October 24, 2022
APV-16 series
October 26, 2022MW Mean Well Meanwell LED Driver 12W Single Output Switching Power Supply APV-12 series
Features
- Constant voltage design
- Universal AC input / Full range
- Protections: Short circuit / Overload / Over voltage
- Fully isolated plastic case
- Cooling by free air convection
- Small and compact size
- Class Ⅱ power unit, no FG
- Class 2 power unit
- Pass LPS
- IP42 design
- Suitable for LED related fixture or appliance (such as LED Decoration or Advertisement devices)
- 100% full load burn-in test
- Low cost, high reliability
- 2 years warranty
Mean Well LED Driver APV-12 Series Data Sheet Download
Description
Mean Well LED driver APV-12 series is one 12W AC/DC constant voltage mode single output LED power supply. It accepts the full range input 90~264VAC and provides three models with different output voltage, 5V(APV-12-5), 12V(APV-12-12), 15V(APV-12-15), 24V(APV-12-24), respectively, that the small wattage LED applications employ the most frequently. Exploiting Class II design (without FG pin) and adopting the 94V-0 flame retardant plastic enclosure, APV-12 ideally fits the entry-level LED applications. In this family, the other series are APV-8 series, APV-16 series, APV-25 series and APV-35 series.
Mean Well LED Driver APV-12 Series Model Encoding
Specification
| MODEL | APV-12-5 | APV-12-12 | APV-12-15 | APV-12-24 | |||
|
OUTPUT |
DC VOLTAGE | 5V | 12V | 15V | 24V | ||
| RATED CURRENT | 2A | 1A | 0.8A | 0.5A | |||
| CURRENT RANGE | 0 ~ 2A | 0 ~ 1A | 0 ~ 0.8A | 0 ~ 0.5A | |||
| RATED POWER | 10W | 12W | 12W | 12W | |||
| RIPPLE & NOISE (max.) Note.2 | 100mVp-p | 120mVp-p | 120mVp-p | 150mVp-p | |||
| VOLTAGE TOLERANCE Note.3 | ±5.0% | ||||||
| LINE REGULATION | ±1.0% | ||||||
| LOAD REGULATION | ±2.0% | ||||||
| SETUP, RISE TIME | Note.6 | 1500ms, 30ms / 230VAC 1500ms,30ms / 115VAC at full load | |||||
| HOLD UP TIME (Typ.) | 20ms/230VAC 15ms/115VAC at full load | ||||||
|
INPUT |
VOLTAGE RANGE | Note.4 | 90 ~ 264VAC 127 ~ 370VDC | ||||
| FREQUENCY RANGE | 47 ~ 63Hz | ||||||
| EFFICIENCY (Typ.) | 76% | 82% | 82% | 84% | |||
| AC CURRENT | 0.2A/230VAC 0.35A/115VAC | ||||||
| INRUSH CURRENT(Typ.) | COLD START 70A (twidth=185μs measured at 50% Ipeak) at 230VAC | ||||||
| MAX. No. of PSUs on 16A CIRCUIT BREAKER | 17 units (circuit breaker of type B) / 29 units (circuit breaker of type C) at 230VAC | ||||||
| LEAKAGE CURRENT | 0.25mA / 240VAC | ||||||
|
PROTECTION |
OVER LOAD | Above 105% rated output power | |||||
| Protection type: Hiccup mode, recovers automatically after fault condition is removed | |||||||
| OVER VOLTAGE | 5.75 ~ 6.75V | 13.8 ~ 16V | 17.5 ~ 21V | 27.6 ~ 32.4V | |||
| Protection type: Shut off o/p voltage, clamping by zener diode | |||||||
|
ENVIRONMENT |
WORKING TEMP. | -30 ~ +70℃ (Refer to “Derating Curve”) | |||||
| WORKING HUMIDITY | 20 ~ 90% RH non-condensing | ||||||
| STORAGE TEMP., HUMIDITY | -40 ~ +80℃, 10 ~ 95% RH | ||||||
| TEMP. COEFFICIENT | ±0.03%/℃ (0 ~ 50℃) | ||||||
| VIBRATION | 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes | ||||||
|
SAFETY & EMC |
SAFETY STANDARDS Note.8 | UL8750, CSA C22.2 No.250.0-08, BIS IS15885(except for 15V), EAC TP TC 004,IP42,
BS EN/EN 62368-1 approved |
|||||
| WITHSTAND VOLTAGE | I/P-O/P:3.75KVAC | ||||||
| ISOLATION RESISTANCE | I/P-O/P:>100M Ohms / 500VDC / 25℃/ 70% RH | ||||||
| EMC EMISSION | Compliance to BS EN/EN55032, BS EN/EN61000-3-2, BS EN/EN61000-3-3, EAC TP TC 020 | ||||||
| EMC IMMUNITY | Compliance to BS EN/EN55024, BS EN/EN61000-4-2,3,4,5,6,8,11; light industry level (surge 2KV), EAC TP TC 020 | ||||||
|
OTHERS |
MTBF | 7488.9K hrs min. Telcordia SR-332 (Bellcore); 1132.5K hrs min. | MIL-HDBK-217F (25℃) | ||||
| DIMENSION | 77*40*29(L*W*H) | ||||||
| PACKING | 0.08Kg; 120pcs/11.8Kg/1.06CUFT | ||||||
Application
Suitable for LED related fixture or appliance (such as LED Decoration or Advertisement devices)
