APC-35 series
October 23, 2022
APV-12 series
October 25, 2022MW Mean Well Meanwell LED Driver 8W Single Output Switching Power Supply APV-8 series
Features
- Constant voltage design
- Universal AC input / Full range
- Class Ⅱ power unit, no FG
- Fully isolated plastic case
- IP42 design
- Small and compact size
- Cooling by free air convection
- Protections: Short circuit / Overload / Over voltage
- No load power consumption <0.5W
- 100% full load burn-in test
- Low cost, high reliability
- 2 years warranty
Mean Well LED Driver APV-8 Series Data Sheet Download
Description
Mean Well LED driver APV-8 series is one 8W AC/DC constant voltage mode single output LED power supply. It accepts the full range input 90~264VAC and provides three models with different output voltage, 5V(APV-8-5), 12V(APV-8-12), 24V(APV-8-24), respectively, that the small wattage LED applications employ the most frequently. Exploiting Class II design (without FG pin) and adopting the 94V-0 flame retardant plastic enclosure, APV-8 ideally fits the entry-level LED applications. The other series in this family are APV-12 series, APV-16 series, APV-25 series and APV-35 series.
Mean Well LED Driver APV-8 Series Model Encoding
Specification
| MODEL | APV-8-5 | APV-8-12 | APV-8-24 | |
|
OUTPUT |
DC VOLTAGE | 5V | 12V | 24V |
| RATED CURRENT | 1.4A | 0.67A | 0.34A | |
| CURRENT RANGE | 0 ~ 1.4A | 0 ~ 0.67A | 0 ~ 0.34A | |
| RATED POWER | 7W | 8.04W | 8.16W | |
| RIPPLE & NOISE (max.) Note.2 | 250mVp-p | 250mVp-p | 300mVp-p | |
| VOLTAGE TOLERANCE Note.3 | ±5.0% | |||
| LINE REGULATION | ±1.0% | |||
| LOAD REGULATION | ±2.0% | |||
| SETUP, RISE TIME | 500ms, 30ms / 230VAC 1500ms,30ms / 115VAC at full load | |||
| HOLD UP TIME (Typ.) | 20ms/230VAC at full load | |||
|
INPUT |
VOLTAGE RANGE Note.4 | 90 ~ 264VAC 127 ~ 370VDC (Note.6) | ||
| FREQUENCY RANGE | 47 ~ 63Hz | |||
| EFFICIENCY (Typ.) | 74% | 80% | 81% | |
| AC CURRENT | 0.15A/230VAC 0.3A/115VAC | |||
| INRUSH CURRENT(Typ.) | COLD START 70A (twidth=120μs measured at 50% Ipeak) at 230VAC | |||
| LEAKAGE CURRENT | 0.25mA / 240VAC | |||
|
PROTECTION |
SHORT CIRCUIT | Hiccup mode, recovers automatically after fault condition is removed | ||
| OVER LOAD | Above 105% rated output power | |||
| Protection type: Hiccup mode, recovers automatically after fault condition is removed | ||||
| OVER VOLTAGE | 5.75 ~ 6.75V | 13.8 ~ 16V | 27.6 ~ 32.4V | |
| Protection type: Shut off o/p voltage, clamping by zener diode | ||||
|
ENVIRONMENT |
WORKING TEMP. | -30 ~ +70℃ (Refer to “Derating Curve”) | ||
| WORKING HUMIDITY | 20 ~ 90% RH non-condensing | |||
| STORAGE TEMP., HUMIDITY | -40 ~ +80℃, 10 ~ 95% RH | |||
| TEMP. COEFFICIENT | ±0.03%/℃ (0 ~ 45℃) | |||
| VIBRATION | 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes | |||
|
SAFETY & EMC |
SAFETY STANDARDS Note.8 | UL8750, CSA C22.2 No.250.0-08, BIS IS15885(except for 5V), BIS IS15885(R-62002178 made in India
only), EAC TP TC 004, BS EN/EN 62368-1 approved |
||
| WITHSTAND VOLTAGE | I/P-O/P:3.75KVAC | |||
| ISOLATION RESISTANCE | I/P-O/P:>100M Ohms / 500VDC / 25℃/ 70% RH | |||
| EMC EMISSION | Compliance to BS EN/EN55032, BS EN/EN61000-3-2, BS EN/EN61000-3-3, EAC TP TC 020 | |||
| EMC IMMUNITY | Compliance to BS EN/EN55024, BS EN/EN61000-4-2,3,4,5,6,8,11; light industry level (surge 2KV), EAC TP TC 020 | |||
|
OTHERS |
MTBF | 9638.4K hrs min. Telcordia SR-332 (Bellcore); 1631.5K hrs min. MIL-HDBK-217F (25℃) | ||
| DIMENSION | 60*30*23.5mm(L*W*H) | |||
| PACKING | 0.05Kg; 144pcs/7.6Kg/0.70CUFT | |||
Application
Suitable for LED related fixture or appliance (such as LED Decoration or Advertisement devices)
