240W Constant Current Mode LED Driver HVGC-240 series

Features

Wide input range 180 ~ 528VAC
Constant Current mode output
Metal housing with Class Ⅰ design
Built-in active PFC function
IP67 / IP65 rating for indoor or outdoor installations
Function options: output adjustable via potentiometer; 3 in 1 dimming (dim-to-off); Smart timer dimming
Typical lifetime>50000 hours
5 years warranty

Data Sheet Download

240W Constant Current Mode LED Driver HVGC-240 Series

Description

HVGC-240 series is a 240W LED AC/DC LED drive featuring the constant current mode and high voltage output. HVGC-240 operates from 180~528VAC and offers models with different rated current ranging between 700mA and 3500mA. Thanks to the high efficiency up to 93.5%, with the fanless design, the entire series is able to operate for -40℃ ~ +90℃ case temperature under free air convection. The design of metal housing and IP67/IP65 ingress protection level allows this series to fit both indoor and outdoor applications. HVGC-240 is equipped with various function options, such as dimming methodologies, so as to provide the optimal design flexibility for LED lighting system.

Model Encoding

Type	IP Level	Function	Note
A	IP65	Io adjustable through built-in potentiometer.	In Stock
B	IP67	3 in 1 dimming function (0~10Vdc, 10V PWM signal and resistance)	In Stock
AB	IP65	Io adjustable through built-in potentiometer & 3 in 1 dimming function (0~10Vdc, 10V PWM signal and resistance)	In Stock
Dx	IP67	Built-in Smart timer dimming function by user request.	By request
D2	IP67	Built-in Smart timer dimming and programmable function.	By request

Specification

MODEL			HVGC-240-700	HVGC-240-1050		HVGC-240-1400		HVGC-240-1750	HVGC-240-2100	HVGC-240-2800	HVGC-240-3500
OUTPUT	RATED CURRENT		700mA	1050mA		1400mA		1750mA	2100mA	2800mA	3500mA
	RATED POWER		240W	240W		240W		240W	240W	240W	240.1W
	CONSTANT CURRENT REGION Note.2		171.4 ~ 342.8V	114.3 ~ 228.6V		85.7 ~ 171.4V		68.5~137.1V	57.2 ~ 114.3V	42.9 ~ 85.7V	34.3 ~ 68.6V
	OPEN CIRCUIT VOLTAGE (max.)		354V	235V		176V		141V	117V	88V	71V
	CURRENT ADJ. RANGE		Adjustable for A/AB-Type only (via built-in potentiometer)
			350~700mA	525~1050mA		700~1400mA		875~1750mA	1050~2100mA	1400~2800mA	1750~3500mA
	CURRENT RIPPLE		5.0% max. @rated current
	CURRENT TOLERANCE		±5%
	SET UP TIME	Note.4	500ms/230VAC, 347VAC, 480VAC
INPUT	VOLTAGE RANGE	Note.3	180 ~ 528VAC 254VDC ~ 747VDC (Please refer to “STATIC CHARACTERISTIC” section)
	FREQUENCY RANGE		47 ~ 63Hz
	POWER FACTOR (Typ.)		PF≧0.98/230VAC, PF≧0.97/277VAC, PF≧0.95/347VAC, PF≧0.93/480VAC @full load (Please refer to “POWER FACTOR (PF) CHARACTERISTIC” section)
	TOTAL HARMONIC DISTORTION		THD< 20%(@ load≧50%/230VAC, 277VAC, 347VAC, @ load≧60%/480VAC) (Please refer to “TOTAL HARMONIC DISTORTION (THD)” section)
	EFFICIENCY (Typ.)		93.5%	93%		93%		93%	92.5%	92.5%	92.5%
	AC CURRENT (Typ.)		0.76A / 347VAC 0.56A / 480VAC
	INRUSH CURRENT(Typ.)		COLD START 50A(twidth= 532μs measured at 50% Ipeak) at 480VAC; Per NEMA 410
	MAX. NO. of PSUs on 16A CIRCUIT BREAKER		4unit(circuit breaker of type B) / 6units(circuit breaker of type C) at 480VAC
	LEAKAGE CURRENT		<0.75mA / 480VAC
PROTECTION	SHORT CIRCUIT		Constant current limiting, recovers automatically after fault condition is removed
	OVER VOLTAGE		360 ~ 394V	240 ~ 263V		180 ~ 197V		144 ~ 158V	120 ~ 131.4V	90 ~ 99V	72 ~ 79V
			Shut down o/p voltage with re-power on to recovery
	OVER TEMPERATURE		Shut down and latch off o/p voltage, re-power on to recover
ENVIRONMENT	WORKING TEMP.		Tcase=-40 ~ +90℃(Please refer to “OUTPUT LOAD vs TEMPERATURE” section)
	MAX. CASE TEMP.		Tcase=+90℃
	WORKING HUMIDITY		20 ~ 95% RH non-condensing
	STORAGE TEMP., HUMIDITY		-40 ~ +80℃, 10 ~ 95% RH
	TEMP. COEFFICIENT		±0.03%/℃ (0 ~ 60℃)
	VIBRATION		10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes
SAFETY & EMC	SAFETY STANDARDS		UL8750 (type”HL”), CSA C22.2 No. 250.13-12, IEC/BS EN/EN61347-1,IEC/BS EN/EN61347-2-13, BS EN/EN62384 independent, EAC TP TC 004, IP65 or IP67 approved
	WITHSTAND VOLTAGE		I/P-O/P:3.75KVAC		I/P-FG:2KVAC		O/P-FG:1.5KVAC
	ISOLATION RESISTANCE		I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH
	EMC EMISSION		Compliance to FCC Part 15 Subpart B, BS EN/EN55015, BS EN/EN61000-3-2(@load≧80%), BS EN/EN61000-3-3, EAC TP TC 020
	EMC IMMUNITY		Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11, BS EN/EN61547, light industry level (surge immunity Line-Earth 4KV, Line-Line 2KV), EAC TP TC 020
OTHERS	MTBF		143.6K hrs min. MIL-HDBK-217F (25℃)
	DIMENSION		254.26838.8mm (LWH)
	PACKING		1.35Kg; 12pcs/17.2Kg/0.78CUFT

Application

LED street lighting
LED high-bay lighting
Parking space lighting
LED fishing lamp
Type “HL” for use in ClassⅠ, Division 2 hazardous (Classified)

Video Show

Find us on SNS

You can find us and know more about us on SNS: