MW Mean Well Meanwell 160W Constant Power Mode LED Driver XBG-160 series

Features

Full power output at 70~100% constant power mode operation
Wide input range 90 ~ 305VAC with active PFC function
Metal housing design with IP67
Function options: output adjustable via potentiometer;

3 in 1 dimming (dim-to-off and Isolation design)

Typical lifetime>50000 hours and 5 years warranty
AC input cable with connector for flexible application

Mean Well LED Driver XBG-160 Series Data Sheet Download

160W Constant Power LED Driver XBG-160 Series

Description

XBG-160 series is a 160W AC/DC LED driver featuring the constant power mode. XBG-160 operates from 90~305VAC and offers with different rated current ranging between 2850mA and 4100mA. Thanks to the high efficiency up to 93%, with the fanless design, the entire series is able to operate for -40℃~+90℃ case temperature under free air convection. The design of metal housing and IP67 ingress protection level allows this series to fit both indoor and outdoor applications. Moreover the innovative environment-adaptive capability allows this series to reliably light on the LEDs for all kinds of application environments in almost any spots that may install LED luminaires in the world. XBG-160 series comply with the latest version of IEC61347/GB7000.1-2015 and UL8750 international safety regulations. The output and dimming circuit are also completely in accordance with the new regulations with isolation to ensure the safety of both users and luminaire system during installation.

In Mean Well LED driver XBG family, there are XBG-100 series, XBG-160 series and XBG-240 series.

Mean Well LED Driver XBG-160 Series Model Encoding

xbg-160_model_encoding — XBG-160 Model Encoding

Type

P Level

Function

Note

A

P67

constant power adjustable via built-in potentiometer

in Stock

AB

P67

constant power adjustable via built-in potentiometer +

3 in 1 dimming function (0~10Vdc, 10V PWM signal and resistor)

in Stock

Specification

MODEL			XBG-160- –
OUTPUT	DEFAULT CURRENT		3300mA
	RATED POWER		159.9W
	CONSTANT CURRENT REGION		34 ~ 56V
	FULL POWER CURRENT RANGE		2850~4100mA
	OPEN CIRCUIT VOLTAGE (max.)		60V
	CURRENT ADJ. RANGE		1425~4100mA
	CURRENT RIPPLE		5.0% max. @rated current
	CURRENT TOLERANCE		±5%
	SET UP TIME	Note.4	500ms/230VAC, 2000ms/115VAC
INPUT	VOLTAGE RANGE	Note.2	90 ~ 305VAC 127 ~ 431VDC (Please refer to “STATIC CHARACTERISTIC” section)
	FREQUENCY RANGE		47 ~ 63Hz
	POWER FACTOR (Typ.)		PF≧0.97 / 115VAC, PF≧0.95 / 230VAC, PF≧0.92 / 277VAC at full load (Please refer to “Power Factor Characteristic” section)
	TOTAL HARMONIC DISTORTION		THD< 10% (@ load≧60% at 115VAC/230VAC ,@load≧75% at 277VAC) Please refer to “TOTAL HARMONIC DISTORTION (THD)” section
	EFFICIENCY (Typ.)		93%
	AC CURRENT (Typ.)		2.0A / 115VAC	0.8A / 230VAC	0.7A / 277VAC
	INRUSH CURRENT(Typ.)		COLD START 50A(twidth=620μs measured at 50% Ipeak) at 230VAC; Per NEMA 410
	MAX. NO. of PSUs on 16A CIRCUIT BREAKER		4 unit(circuit breaker of type B) / 7 units(circuit breaker of type C) at 230VAC
	LEAKAGE CURRENT		<0.75mA / 277VAC
	NO LOAD / STANDBY POWER CONSUMPTION		No load power consumption<0.5W for A-Type Standby power consumption<0.5W for AB-Type
PROTECTION	OVER CURRENT		95 ~ 108%
			Constant current limiting, recovers automatically after fault condition is removed
	SHORT CIRCUIT		Hiccup mode, recovers automatically after fault condition is removed
	OVER VOLTAGE		61 ~ 78V
			Shut down output voltage, re-power on to recovery
	OVER TEMPERATURE		Shut down output voltage, re-power on to recovery
ENVIRONMENT	WORKING TEMP.		Tcase=-40 ~ +90℃(Please refer to “OUTPUT LOAD vs TEMPERATURE” section)
	MAX. CASE TEMP.		Tcase=+90℃
	WORKING HUMIDITY		20 ~ 95% RH non-condensing
	STORAGE TEMP., HUMIDITY		-40 ~ +80℃, 10 ~ 95% RH non-condensing
	TEMP. COEFFICIENT		±0.03%/℃ (0 ~ 60℃)
	VIBRATION		10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes
SAFETY & EMC	SAFETY STANDARDS		UL8750(type”HL”), CSA C22.2 No. 250.13-12; ENEC BS EN/EN61347-1, BS EN/EN61347-2-13 independent, BS EN/EN62384; IS15885(Part2/Sec13);GB19510.1,GB19510.14;IP67;EAC TP TC 004 approved
	WITHSTAND VOLTAGE		I/P-O/P:3.75KVAC	I/P-FG:2KVAC	O/P-FG:1.5KVAC
	ISOLATION RESISTANCE		I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH
	EMC EMISSION		Parameter			Standard	Test Level/Note
			Conducted			BS EN/EN55015(CISPR15)	—–
			Radiated			BS EN/EN55015(CISPR15)	—–
			Harmonic Current			BS EN/EN61000-3-2	Class C @load≥50%
			Voltage Flicker			BS EN/EN61000-3-3	—–
	EMC IMMUNITY		BS EN/EN55024 , BS EN/EN61204-3, BS EN/EN61000-6-2
			Parameter			Standard	Test Level/Note
			ESD			BS EN/EN61000-4-2	Level 3, 8KV air ; Level 2, 4KV contact
			Radiated			BS EN/EN61000-4-3	Level 3
			EFT/Burst			BS EN/EN61000-4-4	Level 3
			Surge			BS EN/EN61000-4-5	4KV/Line-Line 6KV/Line-Earth
			Conducted			BS EN/EN61000-4-6	Level 3
			Magnetic Field			BS EN/EN61000-4-8	Level 4
			Voltage Dips and Interruptions			BS EN/EN61000-4-11	>95% dip 0.5 periods, 30% dip 25 periods, >95% interruptions 250 periods
OTHERS	MTBF		1100K hrs min. Telcordia SR-332(Bellcore) ; 280K hrs min. MIL-HDBK-217F (25℃)
	LIFETIME	Note.5	50000 hrs min.
	DIMENSION		φ151.5mm 60mm(DH)
	PACKING		1.25Kg; 8pcs/11.5Kg/0.93CUFT

Application

LED bay lighting
LED stage lighting
LED spot lighting
Explosion-proof lighting
Type HL LED driver for classⅠ division 2.

Mean Well LED Driver XBG-160 Series Video Show

Find us on SNS

You can find us and know more about us on SNS: