MW Mean Well Meanwell 100W Constant Power Mode LED Driver XBG-100 series

Features

Full power output at 70~100% constant current range operation
Wide input range 90 ~ 305VAC with active PFC function
Metal housing design with IP67
Multiple dimming functions: 3 in 1(0-10V/PWM/Resistor)
Dimming circuit with isolated for latest safety regulation
Surge protection with 6KV/4KV
Typical lifetime>50000 hours and 5 years warranty
AC input cable with connector for flexible installation

Mean Well LED Driver XBG-100 Series Data Sheet Download

100W Constant Power LED Driver XBG-100 Series

Description

XBG-100 series is a 100W AC/DC LED driver featuring the constant power mode. XBG-100 operates from 90~305VAC and offers with different rated current ranging between 1750mA and 2780mA. Thanks to the high efficiency up to 92%, with the fanless design, the entire series is able to operate for -40℃~+85℃ case temperature under free air convection. The design of metal housing and P67 ingress protection level allows this series to fit both indoor and outdoor applications. Moreover, the innovative environment-adaptive capability allows this series to reliably light on the LEDs for all kinds of application environments. XBG-100 series comply with the latest version of EC61347/ EC60598-1 and UL8750 international safety regulations. The output and dimming circuit are also completely in accordance with the new regulations with isolation to ensure the safety of both users and luminaire system during installation.

In Mean Well LED driver XBG family, there are XBG-100 series, XBG-160 series and XBG-240 series.

Mean Well LED Driver XBG-100 Series Model Encoding

xbg-100_model_encoding — XBG-100 Model Encoding

Type

P Level

Function

Note

A

P67

constant power adjustable via built-in potentiometer

in Stock

AB

P67

constant power adjustable via built-in potentiometer +

3 in 1 dimming function (0~10Vdc, 10V PWM signal and resistor)

in Stock

Specification

MODEL			XBG-100- –
OUTPUT	DEFAULT CURRENT		2100mA
	RATED POWER		100W
	CONSTANT CURRBS EN/ENT REGION		27 ~ 56V
	FULL POWER CURRENT RANGE		1750~2780mA
	OPEN CIRCUIT VOLTAGE (max.)		60V
	CURRENT ADJ. RANGE		875~2780mA
	CURRENT RIPPLE		3.0% max. @rated current
	CURRENT TOLERANCE		±5%
	SET UP TIME	Note.4	500ms/230VAC, 1200ms/115VAC
INPUT	VOLTAGE RANGE	Note.2	90 ~ 305VAC 127 ~ 431VDC (Please refer to “STATIC CHARACTERISTIC” section)
	FREQUENCY RANGE		47 ~ 63Hz
	POWER FACTOR (Typ.)		PF≧0.97 / 115VAC, PF≧0.95 / 230VAC, PF≧0.92 / 277VAC at full load (Please refer to “Power Factor Characteristic” section)
	TOTAL HARMONIC DISTORTION		THD< 10% (@ load≧50% at 115VAC/230VAC, @load≧75% at 277VAC) Please refer to “TOTAL HARMONIC DISTORTION (THD)” section
	EFFICIENCY (Typ.)		92%
	AC CURRENT (Typ.)		1.1A / 115VAC 0.5A / 230VAC 0.42A / 277VAC
	INRUSH CURRENT(Typ.)		μCOLD START 50A (twidth=400 s measured at 50% Ipeak) at 230VAC; Per NEMA 410
	MAX. NO. of PSUs on 16A CIRCUIT BREAKER		8 unit (circuit breaker of type B) / 14 units(circuit breaker of type C) at 230VAC
	LEAKAGE CURRENT		<0.75mA / 277VAC
	STANDBY POWER CONSUMPTION		Standby power consumption<0.5W for AB-Type
PROTECTION	OVER POWER		105-150%
			Hiccup mode, recovers automatically after fault condition is removed
	SHORT CIRCUIT		Constant current limiting or Hiccup mode, recovers automatically after fault condition is removed
	OVER VOLTAGE		61 ~ 78V
			Shut down output voltage, re-power on after fault condition is removed to recover
	OVER TEMPERATURE		Shut down output voltage, re-power on after fault condition is removed to recover
ENVIRONMENT	WORKING TEMP.		Tcase=-40 ~ +85℃(Please refer to “OUTPUT LOAD vs TEMPERATURE” section)
	MAX. CASE TEMP.		Tcase=+85℃
	WORKING HUMIDITY		20 ~ 95% RH non-condensing
	STORAGE TEMP., HUMIDITY		-40 ~ +80℃, 10 ~ 95% RH non-condensing
	TEMP. COEFFICIENT		±0.03%/℃ (0 ~ 60℃)
	VIBRATION		10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes
SAFETY & EMC	SAFETY STANDARDS		UL8750(type”HL”), CSA C22.2 No. 250.13-12; ENEC BS EN/EN61347-1, BS EN/EN61347-2-13 independent, BS EN/EN62384; IS15885(Part2/Sec13); GB19510.1, GB19510.14; IP67; EAC TP TC 004 approved
	WITHSTAND VOLTAGE		I/P-O/P:3.75KVAC I/P-PE:2KVAC O/P-PE:1.5KVAC
	ISOLATION RESISTANCE		I/P-O/P, I/P-PE, O/P-PE:100M Ohms / 500VDC / 25℃/ 70% RH
	EMC EMISSION		Parameter		Standard		Test Level/Note
			Conducted		BS EN/EN55015(CISPR15),GB/T17743		—–
			Radiated		BS EN/EN55015(CISPR15),GB/T17743		—–
			Harmonic Current		BS EN/EN61000-3-2,GB/T17625.1		Class C @load≥50%
			Voltage Flicker		BS EN/EN61000-3-3		—–
	EMC IMMUNITY		BS EN/EN61547
			Parameter		Standard		Test Level/Note
			ESD		BS EN/EN61000-4-2		Level 3, 8KV air ; Level 2, 4KV contact
			Radiated		BS EN/EN61000-4-3		Level 3
			EFT/Burst		BS EN/EN61000-4-4		Level 3
			Surge		BS EN/EN61000-4-5		4KV/Line-Line 6KV/Line-Earth
			Conducted		BS EN/EN61000-4-6		Level 3
			Magnetic Field		BS EN/EN61000-4-8		Level 4
			Voltage Dips and Interruptions		BS EN/EN61000-4-11		>95% dip 0.5 periods, 30% dip 25 periods, >95% interruptions 250 periods
OTHERS	MTBF		727.29K hrs min.	Telcordia SR-332(Bellcore) ;188.8K hrs min.		MIL-HDBK-217F (25℃)
	LIFETIME	Note.5	50000 hrs min.
	DIMENSION		φ130mm 56mm(DH)
	PACKING		0.8Kg; 16pcs/ 14.8Kg/1.57CUFT

Application

LED bay lighting
LED stage lighting
LED spot lighting
Explosion-proof lighting
Type HL LED driver for classⅠ division 2.

Mean Well LED Driver XBG-100 Series Video Show

Find us on SNS

You can find us and know more about us on SNS: